324
12
1
A sleeve and shim meant to reduce the movement of an AR-9 barrel in the Urutau.
I recommend printing the sleeve in nylon or some other temperature resistant filament, but PLA should work fine.
Update: Please use this if you don't want your barrel to rotate: https://odysee.com/@ketcham1009:1/Urutau-AR-9-Upper:b
v1.1 - Fixed bad geometry on the upper receiver side
LBRY Tags: ar-9; 3dprinting; ketcham1009; fosscad; urutau
823
14
3
Urutau AR-9 Upper
A 2-part Urutau upper designed for AR-9 barrels.
The upper itself should be printed with the same settings at the normal upper, the sleeve should be…
381
11
Urutau AR-9 barrel Un-Floater v1.1
I wasn't comfortable leaving the AR-9 barrel for the Urutau floating/unsupported. This bracket snaps in to the upper receiver and supports the barrel…
319
9
Urutau Fake Can - AR-9
A fake suppressor for Urutaus that have a 16 inch AR-9 barrel. It attaches to the barrel threads.
The 'front' of the fake can is intentionally left t…
315
6
FGC-9 FGC-6 Custom hammer pin JIG
the idea with this JIG is that you can use a extend hammer pin so the force is spread out more evenly over the lower. this pin is made out of a metal…
Twitter
Matrix
Source
