GunCAD Index

DB Alloy Drum variant printed in Siraya Tech Fibreheart PPA-GF

DB Alloy Collapsible Brace DB's Dojo AR Grip Honey Dipper Foregrip Komodaru Flash Can

Mac 11 upper from Aves RAVE 140 Flat Trigger Suomi 72rd drum from Clearview Investments Collapsible Brace kit & side plates from Riptide Rails Komodaru Flash Can Hardware from Hyperion 2A

This project is nearly a year in the works, with the goal of creating a mixed-material furniture set for the AK series that provides modernized ergonomics while preserving the use of hardwoods for a nearly endless combination of color profiles. Here is my rifle that is currently the model build for the project as it continuously is improved and redesigned as a special interest of mine.

I have used so so many different materials and torture tested with live fire and other meangirl shit. You do you, but here's what I landed on for balancing cost against material properties like heat deflection and tensile strength yada yada and it's PET-GF. Honestly, the shit is fantastic. I'd love to print in PA6-CF/GF all the time but I am poor. You can print th…

My UMP 11/9 Using the MPRTech and remix files in Overture Super/Professional PLA+ for the body and Polymaker HT PLA for the magazines. MPA bolt, Senjutsu-TekinaSeido hardware and trunnion kit, slim 9mm blastcan.

Sig 238 on Tiny 11 Frame, Having some issues with basic PLA so giving a reprint in better materials. But cycles and fires well Printed at 99% Infill, Dont mind the dirty ahh grips im printing new ones

Beretta 21A Tomcat, Ergo remix beta from Miami4 at BLC.

More than 500rds through it and shoots amazing, Kinda complicated little build and documentation is lacking overall for this firearm so took me a second to get it together but rewarding when done Alongside printed thread barrel, using a redman liner to allow for a cheaper can host option Kits are pricey but would 1000% say worth it Printed in PLA+ Sunlu Pink & White, 99% Infill on Elagoo Carbon 2

Hey y'all!

Franken-9 Lite, Overture Super/Pro PLA, G22 slide with extended and ported .357 Sig barrel, Anderson lower parts kit, stainless guide rod and recoil spring...I broke the original plastic one...so far it function check passed, and feeds/extracts/ejects .357 Sig dummy rounds. On to live fire testing!

I give it a normal build rating, fairly easy until you get to putting the firing pin parts together and in the slide, you will need a little muscle.

Running a EDC RMR slide from Hooper Gun Works and an OpticsPlanet threaded G19 barrel. Crush washer and faux supressor are used. Using PY2A Glock 19 rails, and a cheap lower parts kit from eBay. Quite reliable, although moreso without the heavy fake supressor.

Printed parts are: NEO9 PY2A-19 Long Grip NEO9 Upper Cowl (in MJF nylon from Xometry) Handstop with Fin NEO9 Extended Magazine Plate Ether3D Tailhook Brace Clearanced Muzzle Plate

Build is quite easy, it goes together like a regular G19. Shouldn't take you more than 30 minutes.

My 3rd build, a M4gery from Kaewon, M4A2 with custom barrel tip to thread VP22 accesories on like Saturn Suppressor. Again, a spring air gun barrel is used. Totally made out of ABS.

Orca V5.3 printed in Siraya Tech Fibreheart PPA-CF

Hochul PMAG remix from kaewon printed in Siraya Tech Fibreheart PPA-CF Core

Orca Complete Build Kit from Hoffman Tactical

Quick & Simple MP25 Raven build, kit from everygunpart for the barrel & after a bit of struggle with getting the old frame bits off it all went together very easily. 99% Infill in Sunlu PLA+

Cant link the exact file on here for reasons but XD9/XD40 Frame by Socom458 & DBFirearms over at AWCY. Printed at 99% Infill with basic red Sunlu PLA, running an XD40 kit & fires great

38DD Rev1.1 build Printed from Qidi PAHT-CF Barrel is a 38HDL spec 41mm ODx 38mmID seamless stainless tube. Options for fence post and launcherpope liners are in the files.

Designed and built as a rugged testing platform for smokeless Hi/Lo signal rounds.

Black Walnut 10/22 chassis in PET-GF with factory receiver and slip on thread adapter. Using a printed stock I already had laying around. Wood M-LOK grip from Haymarket customs. Rattle can camo job, magpul grip, vortex lpvo. Is there an frt inside? Or a ftn suppressor attached? Who is to say. The model stuffy was a gift from my attorney. Its a sloth.

Double Dysfunction. Projectile Dysfunction 15mm remixed as a double barrel.