381
11
I wasn't comfortable leaving the AR-9 barrel for the Urutau floating/unsupported. This bracket snaps in to the upper receiver and supports the barrel from the front.
v1.1 - added a 19mm barrel variant
LBRY Tags: ketcham1009; ar-9; fosscad; 3dprinting; urutau
v1.1 - added a 19mm barrel variant
LBRY Tags: ketcham1009; ar-9; fosscad; 3dprinting; urutau
Related to This Release
1073
10
Urutau Integral Suppressor UIS Beta Branch V0.01 R2
The Urutau integral suppressor (UIS for short) exists in 2 versions, short and long.
You can identify these primarily by barrel length and type, but …
823
14
Urutau AR-9 Upper
A 2-part Urutau upper designed for AR-9 barrels.
The upper itself should be printed with the same settings at the normal upper, the sleeve should be…
324
12
Urutau AR-9 barrel sleeve and shim v1.1
A sleeve and shim meant to reduce the movement of an AR-9 barrel in the Urutau.
I recommend printing the sleeve in nylon or some other temperature r…
319
9
Urutau Fake Can - AR-9
A fake suppressor for Urutaus that have a 16 inch AR-9 barrel. It attaches to the barrel threads.
The 'front' of the fake can is intentionally left t…
137
6
Harlot 6.5 inch barrel muzzle devices
A collection of muzzle devices designed for my 6.5 inch harlot barrel.
The thread adapter attaches to the front of the accessory rail and slips over…
Twitter
Matrix
Source
