319
9
View this release
Alternative links
A fake suppressor for Urutaus that have a 16 inch AR-9 barrel. It attaches to the barrel threads.
The 'front' of the fake can is intentionally left too narrow and unthreaded, this is to prevent it from being used as a suppressor (and from being technically classified as one).
You may need to use a threading tool to clean up the threads, especially when using cf-nylon.
It's based off of this one by Kilo https://odysee.com/@killo:3/urutau-fake-can:e
LBRY Tags: urutau; ar9; 3dprinting; fosscad; ketcham1009
The 'front' of the fake can is intentionally left too narrow and unthreaded, this is to prevent it from being used as a suppressor (and from being technically classified as one).
You may need to use a threading tool to clean up the threads, especially when using cf-nylon.
It's based off of this one by Kilo https://odysee.com/@killo:3/urutau-fake-can:e
LBRY Tags: urutau; ar9; 3dprinting; fosscad; ketcham1009
Related to This Release
324
12
Urutau AR-9 barrel sleeve and shim v1.1
A sleeve and shim meant to reduce the movement of an AR-9 barrel in the Urutau.
I recommend printing the sleeve in nylon or some other temperature r…
823
14
Urutau AR-9 Upper
A 2-part Urutau upper designed for AR-9 barrels.
The upper itself should be printed with the same settings at the normal upper, the sleeve should be…
381
11
Urutau AR-9 barrel Un-Floater v1.1
I wasn't comfortable leaving the AR-9 barrel for the Urutau floating/unsupported. This bracket snaps in to the upper receiver and supports the barrel…
2102
12
Urutau - Normal Length - Metric Bolt
The Urutau was originally designed between 2021 and 2024 by Zé Carioca, a pseudonymous Brazilian gun designer. The design was beta tested on the plat…
145
7
Harlot tilt limiter frame
A set of left and right frame parts that limit the tilt of the harlot's barrel to roughly 50 degrees.
LBRY Tags: 22lr; pistol; ketcham1009; 3dprinti…
Twitter
Matrix
Source
