137
6
A collection of muzzle devices designed for my 6.5 inch harlot barrel.
The thread adapter attaches to the front of the accessory rail and slips over the front of the barrel, threading is standard soda bottle thread.
Includes 2 flash hiders (A2 and AUG style) and a flash can.
LBRY Tags: ketcham1009; 3dprinting; 22lr; harlot; pistol
The thread adapter attaches to the front of the accessory rail and slips over the front of the barrel, threading is standard soda bottle thread.
Includes 2 flash hiders (A2 and AUG style) and a flash can.
LBRY Tags: ketcham1009; 3dprinting; 22lr; harlot; pistol
Related to This Release
647
15
UFA Compliance Barrel Extender for Harlot
This barrel extension is a reskin for the MK23 style generic model that allows you to place metal spacers or weight to the front of a Harlot 3d print…
324
12
Urutau AR-9 barrel sleeve and shim v1.1
A sleeve and shim meant to reduce the movement of an AR-9 barrel in the Urutau.
I recommend printing the sleeve in nylon or some other temperature r…
384
5
Harlot Snub Barrel GLK v1
Harlot Remixed barrel to look like a glock.
I print with barrel tip faced down on print bed.
With 100% infill
5 walls - 6 walls top and bottom
suppo…
183
16
Pla_ak_ak_ak 1022 Muzzle device
This is a 10/22 Muzzle device I made because I couldn't find any I liked
Comments will not be monitored
if you find any problems with this design p…
4
2
HubTN.4 - 22lr, V13, bald (v2)
V13 Bald is its minimum viable, quickest to make, rifle variant meant to be printed vertically upside down and used without a sleeve. There are 1/2, …
Twitter
Matrix
Source
