493
10
you can just slide this one in the type of brass catcher shown in the pictures. this model can be found at places like Aliexpress. what the frame will do is make sure that is stays open and helps to presents from folding that would restricts the cases from getting out of the ejection port
it’s made to work with the MKII but it will work with the MKI models as well
I have noticed that it could use a spacer piece in the part where it clamps down. so it doesn't pull the brass catcher in a angle
a M5 knob have been added so it's more easy to remove or tighten by hand.
the “PLUS part” can be placed in the rail on your shroud to remove some play
(this is for the older shrouds the MKIISD mini rail wil not be needing this part.)
LBRY Tags: fgc; fgc-9 mkii; fgc-9 mki; fgc-9 mkiisd; fgc-9 parts
it’s made to work with the MKII but it will work with the MKI models as well
I have noticed that it could use a spacer piece in the part where it clamps down. so it doesn't pull the brass catcher in a angle
a M5 knob have been added so it's more easy to remove or tighten by hand.
the “PLUS part” can be placed in the rail on your shroud to remove some play
(this is for the older shrouds the MKIISD mini rail wil not be needing this part.)
LBRY Tags: fgc; fgc-9 mkii; fgc-9 mki; fgc-9 mkiisd; fgc-9 parts
Related to This Release
1233
18
1
FGC-9 MKI and MKII: UNW EXTRACTOR
read the PDF manual for more details. but with these tools and instructions should it not be that hard to make your own extractor for the FGC9 platfo…
546
13
FGC-9 MKI MKII MKIIsd M5 bolt grip lowers set
these lowers will use a M5 bolt that is 25mm long with 1 M5 washer and the M6 lock washer
so the lower got a bit more material so it should be strong…
508
5
Menendez Magazine v2.0 base plate number matrix mod
it’s basically the same as the standard base plate but it got the space to mark the magazine for identification
other parts can be found in the pack…
218
2
FGC-9_MkII Buffed Buffer Tube and shims
After my buffer tube breaking from a fall (not firing/cycling) not once but twice right behind the mounting flange, i decided to try and help it out …
146
6
FGC-9 MKI charging handle drilling template
there are 2 models for two type of drills one in 3mm and one in 4mm. the idea here is that this small piece can help with keeping the drill at the co…
Twitter
Matrix
Source
