218
2
View this release
Alternative links
After my buffer tube breaking from a fall (not firing/cycling) not once but twice right behind the mounting flange, i decided to try and help it out a little. this retains the standard MKII buffer dimensions for the butt stalk and mounting flange but beefs up the o.d. in the transition area, adds bracing that should almost meet the butt stalk. i recommend using allen head screws (the hex heads should fit but getting a socket over them will be next to impossible) with washers instead of the hex screws for ease of instillation. also retains originat FOSSCAD logo but made 0.2mm deeper for better visibility!
update 11-22-24 after some testing i found it was possible to over tighten the lower screw enough to tork the whole tube just enough that the bolt would bind up, so updated to include shims! simply remove the lower buffer tube screw, insert the shim, retighten the screw. 2 shims are included- 1mm and 1.5mm. i found the 1.5mm worked best. hole is slightly oversized so it literally should just slide in!
LBRY Tags: mod; fgc-9; mkii; buffer; tube
update 11-22-24 after some testing i found it was possible to over tighten the lower screw enough to tork the whole tube just enough that the bolt would bind up, so updated to include shims! simply remove the lower buffer tube screw, insert the shim, retighten the screw. 2 shims are included- 1mm and 1.5mm. i found the 1.5mm worked best. hole is slightly oversized so it literally should just slide in!
LBRY Tags: mod; fgc-9; mkii; buffer; tube
Related to This Release
493
10
FGC-9 MKI / MKII / MKIISD brass catcher frame
you can just slide this one in the type of brass catcher shown in the pictures. this model can be found at places like Aliexpress. what the frame wil…
218
10
Stingray 1913 rail for standard FGC-9 buffer V1.1
Rear 1913 rail for use with the Stingray upper and regular FGC-9 buffer tube.
12/16/23 - Added slightly stronger V1.1 version
LBRY Tags: fgc-9; buff…
855
10
FGC-9 MKII BumbleBee Tuna Handguard Remix
This is a remix of RICECUTTA's KJAS handguard for the FGC-9 MKII 3D printable carbine pistol firearm that can be found on the Gatalog.
When I origin…
257
10
Project 73.2 - FGC-9 MKII V0.001 R1
No description provided for this release
768
18
FGC9 MKII AR9 Barrel Upper, Modified Stingray, MKII Retainers
This FGC9 MKII upper has been modified to fit AR9 barrels, and to accept both MKI and MKII style charging handles. A modified Stingray style retainer…
Twitter
Matrix
Source
