1233
18
1
View this release
Alternative links
read the PDF manual for more details. but with these tools and instructions should it not be that hard to make your own extractor for the FGC9 platform.
it also includes a section about clearing malfunctions with a FGC-9
note: to my knowledge does this have seen only some limited testing. the feedback so far was that not hard to make. but it have a potential to get damaged. so by no means do I believe this is 100% done and can’t be improved up on. but I would like to see were some people would take this concept.
the dummy-blank-round-v4.STL is to help guide a empty round in the chamber with just a primer installed so you can test out your head spacing. why not just hand chamber the round? the extractor makes this really hard to do. so either do this before making the extractor or use this to feed the “blanks” from the mag to the chamber.
LBRY Tags: fgc; fgc-9; fgc-9 mkii; fgc-9 mki; fgc-9 mkiisd
it also includes a section about clearing malfunctions with a FGC-9
note: to my knowledge does this have seen only some limited testing. the feedback so far was that not hard to make. but it have a potential to get damaged. so by no means do I believe this is 100% done and can’t be improved up on. but I would like to see were some people would take this concept.
the dummy-blank-round-v4.STL is to help guide a empty round in the chamber with just a primer installed so you can test out your head spacing. why not just hand chamber the round? the extractor makes this really hard to do. so either do this before making the extractor or use this to feed the “blanks” from the mag to the chamber.
LBRY Tags: fgc; fgc-9; fgc-9 mkii; fgc-9 mki; fgc-9 mkiisd
Related to This Release
199
1
FGC9-MKII fixed low rail upper
this are the MKII uppers with the top rail already mounted on there this the low rail version so it’s one piece and no need to look for screw’s. but …
349
9
FGC9-MKII / MKIISD Jstark1809 edition lower
I probably feels a bit on the late site of things to make a release like this… I did made a design soon after his passing but it was a bit to detaile…
146
6
FGC-9 MKI charging handle drilling template
there are 2 models for two type of drills one in 3mm and one in 4mm. the idea here is that this small piece can help with keeping the drill at the co…
1188
3
[不区石译][J.Stark] FGC-9 MKII [中文翻译/Chinese]
无聊翻译的文件，可能文件内的一些PDF文件里的页面指导会错或乱，但正常阅读大概是没问题的，至少不是机翻，但有些词语实在难以找到中文对照的词，若有错误欢迎指出，若较多人下载我可能会继续上传别的翻译的文件(文件里的英制文件我没翻译反正中国不用英制单位)。
注意：此文件所有内容仅用于教育或研究等目的，禁…
151
2
FGC9 MKII / MKIISD no sling mount upper
this the same upper just with out the sling mount on it. ow with sling mount like the original MKII upper.
what makes this a MKIISD upper? the only …
Twitter
Matrix
Source
