546
13
View this release
Alternative links
these lowers will use a M5 bolt that is 25mm long with 1 M5 washer and the M6 lock washer
so the lower got a bit more material so it should be stronger. does this mean that you ned to modified the pistol grips. no. you can still use the same models I have used a small spacer piece around my M5 bolt but it's something that might not be needed at all really.
——
MKII vs MKIISD version
this lower got the same concept of using a metal rod with a OD of 4mm and 26mm long as with the FGC9 SD, and I have seen if done before by others. it’s fair to say that it would limit the potential of that part to break.
the MKIISD version will hide the metal pin and makes it look like a stock MKII
but with this design you can hide the metal part. it’s up to you if you like that look better or not.
LBRY Tags: fgc9; fgc9mki; fgc9mkii; fgc9mkiisd; lower
so the lower got a bit more material so it should be stronger. does this mean that you ned to modified the pistol grips. no. you can still use the same models I have used a small spacer piece around my M5 bolt but it's something that might not be needed at all really.
——
MKII vs MKIISD version
this lower got the same concept of using a metal rod with a OD of 4mm and 26mm long as with the FGC9 SD, and I have seen if done before by others. it’s fair to say that it would limit the potential of that part to break.
the MKIISD version will hide the metal pin and makes it look like a stock MKII
but with this design you can hide the metal part. it’s up to you if you like that look better or not.
LBRY Tags: fgc9; fgc9mki; fgc9mkii; fgc9mkiisd; lower
Related to This Release
159
4
FGC-9 MKI UNW BOLT on MID rail UPPER set
this lower top rail will work with your stock FGC9 MKI,FGC6 MKI Uppers.
how to mount these these work with the Flat Countersunk Head M3 Screws in a …
496
6
FGC-9 MKII UNW BOLT on low rail UPPER set
this lower top rail will work with your stock FGC9 MKII,FGC6 MKII and FGC9 MKIISD Uppers.
this model is made to go in place of the stock top rail th…
493
10
FGC-9 MKI / MKII / MKIISD brass catcher frame
you can just slide this one in the type of brass catcher shown in the pictures. this model can be found at places like Aliexpress. what the frame wil…
278
5
FGC9-MKII MKIISD UNW227 SLIM shroud FGC6-MKII
I have updated it to a V2 model this will add 1 extra bolt hole so the rail is stronger
--
these MKIISD shroud models will work on the MKII platfor…
310
6
FGC-9 MKII to SD magnet UPDATE JIG - MKIISD
this jig is made so it can help you get the same magnet placement. as that of the FGC9 SD version. what will lock in your charging handle forward. an…
Twitter
Matrix
Source
