482
19
2
FBS-5 (AKM) V1.0.2: Laffs Dynamics
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
LBRY Tags: 3d printing; firearms; rpk; stock; ak
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 38%
Support Material Percentage: 18%
LBRY Tags: 3d printing; firearms; rpk; stock; ak
Related to This Release
494
19
HG-2 (Rem 870)
HG-2 (Rem 870): Laffs Dynamics
Handguard design for the Remington 870 shotgun. Has three full M-LOK slots on the 3, 4-5, 6, 7-8. and 9 o clock posit…
595
15
"Back To Basics" Knuckleduster
"Back To Basics" Knuckleduster V1.0.1: Laffs
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer …
460
16
FBS-3 (AKM) V1.0.1
FBS-3 (AKM) V1.0.1: Laffs Dynamics
A fixed buttstock, derived from the FBS-1 (AKM) buttstock design.
Overall length has been shortened to 250.8mm.…
557
4
The Classic AKM Grip
The Classic AKM Grip: Laffs Dynamics
Externally mimics the look and feel of common AKM grips; modeled off of the common Romanian reverse checkered p…
237
11
FBS-2 (AKM) (Rev 1)
FBS-2 (AKM) (Rev 1): Laffs Dynamics
Revision of the original Laffs Dynamics FBS-2 AKM Buttstock. Follows the original's design parameter of a higher…
Twitter
Matrix
Source
