460
16
View this release
Alternative links
FBS-3 (AKM) V1.0.1: Laffs Dynamics
A fixed buttstock, derived from the FBS-1 (AKM) buttstock design.
Overall length has been shortened to 250.8mm. For use by people that require a shorter LOP.
(The fembois need AKs too ye know :3)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 34%
Support Material Percentage: 20%
Hardware Needed:
2x M4x12mm Screws
A fixed buttstock, derived from the FBS-1 (AKM) buttstock design.
Overall length has been shortened to 250.8mm. For use by people that require a shorter LOP.
(The fembois need AKs too ye know :3)
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 6+
Infill: 34%
Support Material Percentage: 20%
Hardware Needed:
2x M4x12mm Screws
Related to This Release
482
19
2
FBS-5 (AKM) V1.0.2
FBS-5 (AKM) V1.0.2: Laffs Dynamics
Based off the FBS-4 AKM buttstock, this model is designed for a more modern look.
Printer Used: Ender 3 V2
F…
110
Gator Skin Heritage Rough Rider Grip Panels
Gator Skin Heritage Rough Rider Grip Panels: Laffs Dynamics
Grip panels for the Heritage Rough Rider revolver, with a gator skill pattern embossed i…
237
11
FBS-2 (AKM) (Rev 1)
FBS-2 (AKM) (Rev 1): Laffs Dynamics
Revision of the original Laffs Dynamics FBS-2 AKM Buttstock. Follows the original's design parameter of a higher…
968
5
AR/Evo Grip Adaptor V1.2.1
AR/Evo Grip Adaptor V1.2.1: Laffs
An adaptor designed for mounting standard AR-15 grips to the CZ Scorpion Evo 3.
Reuploaded due to reports of prev…
485
3
FBS-2-Skel (AKM)
FBS-2-Skel (AKM): Laffs
Skeletonized variant of the original Laffs Dynamics FBS-2 AKM buttstock.
Printer Used: Ender 3 V2
Filament Used: PLA+
P…
Twitter
Matrix
Source
