673
14
View this release
Alternative links
Loose Change is a take on your normal fused pusher bases for @VanillaKyleKyle:c Modular Signaling System (MSS). For the guys running smokeless loads, especially in the many Hi/Low configurations out there, you may have noticed the increased pressure quickly shreds fuses and causes for failures to detonate. The nickel absorbs the primary blast to prevent this from happening.
Under the “Tolerance Testers” folder there is some test pieces to print out. You want the nickel to fit snug. Once you find the tolerance that fits best, print the corresponding pushers. It’s still recommended to put a couple drops of superglue on the pusher before seating your nickel.
Notice: These do add right at 5mm of protrusion from the base of the pusher into the casing space. Depending on the combination of your MILC/Hydra chamber and brass length, these might not fully seat without cutting your hybrid brass longer. Make sure you had the space required inside your case.
LBRY Tags: 37mss; 37mm; signaling; launcher
Under the “Tolerance Testers” folder there is some test pieces to print out. You want the nickel to fit snug. Once you find the tolerance that fits best, print the corresponding pushers. It’s still recommended to put a couple drops of superglue on the pusher before seating your nickel.
Notice: These do add right at 5mm of protrusion from the base of the pusher into the casing space. Depending on the combination of your MILC/Hydra chamber and brass length, these might not fully seat without cutting your hybrid brass longer. Make sure you had the space required inside your case.
LBRY Tags: 37mss; 37mm; signaling; launcher
Related to This Release
315
19
37MM Ported Barrel Drilling Jig
This is a jig that clamps on to 1.5” tubing used for 37MM barrels. There is 2 models included.
- Filing Clamp - This uses less material and gives a …
173
3
37mm wipe attachment v1
throwing this idea to sea, this is a 37mm wipe attachment print settings is the same for the FTN4 this is an open beta idea feel free to copy change…
856
16
37mm Triple Banger (15mm x3)
Allows your 37mm launcher to fire x3 or x2 diy or commercial 15mm rounds, using a 209 primer.
Ramset variant is still under development.
DO NOT ADD B…
414
6
37mm rifled ammo pack
my redid 37mm rifeled assortment of different rounds .based of the ammo pack in the gu37 file..the rounds need to be scaled to 94%
LBRY Tags: 37mm
762
11
Cherry Popper 26.5mm
Want to pop some cherrys but cant find fence post at your local hardware store?
Or do you just prefer the 26.5mm over 37mm?
Or maybye you just want t…
Twitter
Matrix
Source
