173
3
throwing this idea to sea, this is a 37mm wipe attachment print settings is the same for the FTN4 this is an open beta idea feel free to copy change edit as much as possible. not tested as of 01/27/2025
LBRY Tags: 2a; 3d printing; 3d2a; freedom; testing
762
11
4
Cherry Popper 26.5mm
Want to pop some cherrys but cant find fence post at your local hardware store?
Or do you just prefer the 26.5mm over 37mm?
Or maybye you just want t…
814
9
HEDB 37mm Threaded Base Pack
The idea behind the project was for a 'modular' 37mm round. Threaded bases
and projectiles could be reloaded in large quantities, while only requirin…
427
11
NAMELESS BABY 15mm BETA
15mm NAMELESS BABY launcher remixed from the projectile disfunction.
THIS HAS ONLY BEEN TESTED WITH 209 PRIMERS SO FAR, SO USE .22 RAMSET BLANKS WITH…
249
11
1
26.5mm Chalk Round
Fill with chalk. Close with earplug or whatever else you can stuff in there. I built up some hot glue and closed it off with that.
LBRY Tags: 37…
Twitter
Matrix
Source
