315
19
2
This is a jig that clamps on to 1.5” tubing used for 37MM barrels. There is 2 models included.
- Filing Clamp - This uses less material and gives a flat surface to file against to ensure perfectly flush barrel ends.
- Porting Jig - Clamp to the end of your barrel and use a 5/16th drill bit to port your barrel. Can also be used as a filing jig.
LBRY Tags: 37mm; signaling; launcher; flares
Related Lemmy Discussions
u/OsmiumOG · 2024-10-13 03:34:33 UTC · score 1
It's up now! :) Can search "37mm Ported Barrel Drilling Jig" hosted by "F3DS"
u/OsmiumOG · 2024-10-13 03:05:01 UTC · score 3
Sorry, took me longer than anticipated and then the sea took like 11minutes to confirm my upload lmao but its up there now.
Can search for "37MM Ported Barrel Drilling Jig" Hosted by "F3DS"
856
16
37mm Triple Banger (15mm x3)
Allows your 37mm launcher to fire x3 or x2 diy or commercial 15mm rounds, using a 209 primer.
Ramset variant is still under development.
DO NOT ADD B…
673
14
2
Loose Change (37MM : 37MSS)
Loose Change is a take on your normal fused pusher bases for @VanillaKyleKyle:c Modular Signaling System (MSS). For the guys running smokeless loads,…
814
9
HEDB 37mm Threaded Base Pack
The idea behind the project was for a 'modular' 37mm round. Threaded bases
and projectiles could be reloaded in large quantities, while only requirin…
135
7
Apache 3800 37mm Storage grid
This is a 3d printed insert for the apache 3800 case from harbor freight.
It can be printed on most printers if they are capable of printing 190mm x…
Twitter
Matrix
Source
