187
2
View this release
Alternative links
Modified PLA Soldir's "CMMG Trips V2" to work with the TURD. The inner wall was too thin and would fail after just a single mag. I've run through over 1k rounds on regular PLA using a TURD with a shortened arm to prevent it from hitting the BCG.
-Sand all faces/surfaces that contact the upper reicever/bcg with 200+ grit until smooth to help prevent biding.
LBRY Tags: 22; 22lr; trip; frt; guncad
-Sand all faces/surfaces that contact the upper reicever/bcg with 200+ grit until smooth to help prevent biding.
LBRY Tags: 22; 22lr; trip; frt; guncad
Related to This Release
294
5
TURD Arm+Actuator for CMMG 22LR AR BCG
A cut down arm and actuator for the TURD to work with the trip I also uploaded. This enables the TURD to work with your CMMG 22LR BCG kit.
-Don't f…
279
6
NULL-22 UFA COMPLIANT FRAME
UFA Compliant frame for @Just-in-Case:2 's NULL-22.
-Spread epoxy in cavity first
-Add at least 3.7oz / 105g of metal
-Seal cavity with cap and epo…
717
5
NaG RMR Dovetail Adapter
RMR dovetail adapter plate for use with the "NOT-A-GLOCK" printed .22lr pistol created by "Ju5t3nc4s3" .
Two versions are available, one for use wit…
24
2
AR BCG Carrying Case
Like carrying your 5.56 and 22lr BCG's with you to the range? I do. Here's a case to store it when you are swapping.
LBRY Tags: ar15; bolt carrier …
407
9
1
NAG funnel and drill jig
Little funnel to help with the drilling and adding the 50 grams of tungsten powder inside the slide underneath the sight. The hole in the bottom is 4…
Twitter
Matrix
Source
