294
5
A cut down arm and actuator for the TURD to work with the trip I also uploaded. This enables the TURD to work with your CMMG 22LR BCG kit.
-Don't forget a bolt weight to avoid an out-of-battery, and reliability issues.
-Sand all flat mating surfaces to 200 grit or higher
LBRY Tags: turd; cmmg; frt; 22lr; 22
-Don't forget a bolt weight to avoid an out-of-battery, and reliability issues.
-Sand all flat mating surfaces to 200 grit or higher
LBRY Tags: turd; cmmg; frt; 22lr; 22
Related to This Release
326
7
Daichi Barrel Nut for Dedicated 22 AR Barrels
This is a barrel nut to use the Daichi handguards with my Dedicated 22 AR barrels. Essentially just added the chamfer on mating surface.
**Untested…
185
12
CMMG AR-15 22LR Single Stack Magazine
Here's my take on printable AR-15 22LR magazines for CMMG conversion kit and similar. The project started way back in 2018 and has been put on hold d…
164
6
CMMG 22LR Anti Bounce Weight and Sear Trip
Anti Bounce Weight
Has serration for forward assist which extends a bit back to impact buffer, slowing down the bolt. A Rubber Pad can also be insta…
91
4
CMMG AR15 .22LR AR22 Buffer Spring Spacer
I made this spacer for CMMG .22LR conversion kits. It's installed in place of the stock AR15 buffer weight, and uses the stock AR15 buffer spring to …
36
3
TURD Add-On for AR BCG Carrying Case
The 22lr trip needs a TURD with a shorter arm, so I made an addon to carry both the BCG and Turd for each setup.
LBRY Tags: turd; case; bcg; lid
Twitter
Matrix
Source
