717
5
View this release
Alternative links
RMR dovetail adapter plate for use with the "NOT-A-GLOCK" printed .22lr pistol created by "Ju5t3nc4s3" .
Two versions are available, one for use with hex nuts and another for threaded brass inserts. Use whichever suits
your preferences. Both are designed for M3 hardware. Bolt length will depend on the optic, but 10mm seems typical.
Print settings should be the same as the NaG.
.16 Layer Height
8 Walls
100% Infill
Enable Supports
Support removal can be a pain if your settings aren't dialed in. If you can't be bothered with supports & don't care
about the front alignment nubs then just flip the mount over and submerge it -2mm below the build plate in your slicer.
LBRY Tags: nag; not-a-glock; .22; rmr; 3d2a
Two versions are available, one for use with hex nuts and another for threaded brass inserts. Use whichever suits
your preferences. Both are designed for M3 hardware. Bolt length will depend on the optic, but 10mm seems typical.
Print settings should be the same as the NaG.
.16 Layer Height
8 Walls
100% Infill
Enable Supports
Support removal can be a pain if your settings aren't dialed in. If you can't be bothered with supports & don't care
about the front alignment nubs then just flip the mount over and submerge it -2mm below the build plate in your slicer.
LBRY Tags: nag; not-a-glock; .22; rmr; 3d2a
Related to This Release
606
7
nag-ar-fcg
No description provided for this release
73
9
MFN22 ThiccBoi Mag Catch
Thicc mag catch for MFN22. Untested but should work without issue. One is just thicker, the other has a hole for a 3mm rod. Embrace the THICCNESS. Al…
407
9
1
NAG funnel and drill jig
Little funnel to help with the drilling and adding the 50 grams of tungsten powder inside the slide underneath the sight. The hole in the bottom is 4…
483
17
.22rl Walking Stick
No description provided for this release
168
5
null-22 custom backplates
null-22 custom backplates
LBRY Tags: 3d print; 3d2a; fosscad; guncad; null-22
Twitter
Matrix
Source
