1331
24
View this release
Alternative links
This is the BPNVG single monacle body, and single monacle lens retainer, with the front sensor mount, gasket, and internal parts. Everything needed to make the single sensor unit of the BPNVG.
This device will need:
1x Runcam Night Eagle II Pro (or substitute and shims to fit housing)
1x Adafruit 2" NTSC analog display
1x 38mm diameter 50mm focal distance biconvex lens
M5 hardware set, bolts.
1/4-20 bolt and nut with washers for mount (length dependent on mount)
12v power cable of any style and power source between 6-12v.
There will be more to come, and a fully fleshed out open source release will occurr at the end of this project.https://www.indiegogo.com/projects/bpnvg-bootleg-panoramic-night-vision-goggles/x/28119010#/updates/all
LBRY Tags: bpnvg; nightvision; stubbs; tfb
This device will need:
1x Runcam Night Eagle II Pro (or substitute and shims to fit housing)
1x Adafruit 2" NTSC analog display
1x 38mm diameter 50mm focal distance biconvex lens
M5 hardware set, bolts.
1/4-20 bolt and nut with washers for mount (length dependent on mount)
12v power cable of any style and power source between 6-12v.
There will be more to come, and a fully fleshed out open source release will occurr at the end of this project.https://www.indiegogo.com/projects/bpnvg-bootleg-panoramic-night-vision-goggles/x/28119010#/updates/all
LBRY Tags: bpnvg; nightvision; stubbs; tfb
Related to This Release
347
11
Rubber Duck M7 Bayonet
This is a printable dummy M7 bayonet for the Rubber Duck M16.
There is not a latch or any hardware needed for simplicity and safety.
LBRY Tags: m7…
815
4
Laffs PDW XL Sights
Laffs PDW XL Sights: Laffs Dynamics
Taller variant of the original 3FTech/Laffs PDW Sights.
Have gotten numerous requests for a taller version ove…
465
16
Ionic Pillar Mlok VFGs
This is a vertical foregrip inspired by Greco-Roman Pillars.
Magpul Mlok hardware is required to install.
Mlok is a registered trademark of Magpul,…
440
9
BPNVG Lens Protector Sensor Mount
This is an alternative sensor mount for the BPNVG that uses a 28.5mm anti reflective coated lens intended for a Surefire 6P Flashlight.
This both ma…
3268
45
1
Pipe Hitter 37mm Launcher
This is an open source 37mm Launcher based on a linear firing pin design similar to cheap Cobray branded launchers.
This launcher uses a simple swing…
Twitter
Matrix
Source
