138
6
This is a 40mm caseless shell used to launch an Elona Gay WP40 smoke cylinder. Print in PLA with 100% infill. use a 209 primer and fill the cup with black powder and secure by placing a piece of tape over the entire powder cup. The Elona Gay WP40 must have the pull wire removed and the fuse inside exposed.
335
5
40MM "NippleRound" Projectile
This is a projectile for a 40mm launcher that accepts a M182A1 Arty Sim. Ensure the rifle bands come out at 1.620-1.625" and the diameter for the cas…
196
5
NippleRound-AirBurst-m781
This is a 40mm projectile designed to accept arty sims- either the air burst or the point detonate versions. Print with 100% infill with PLA, no supp…
131
6
bb40ppd001-primer_housing
I recommend using PLA, 0.15mm layer height, 100% infill, tree style support (from build plate only). You may have to scale the object to get the corr…
80
7
NippleRound-publicreleasecandidate002
This is a release candidate with small update to the nipple round. This now has a solid driving band area and an angle on the driving band over hang …
Twitter
Matrix
Source
