80
7
This is a release candidate with small update to the nipple round. This now has a solid driving band area and an angle on the driving band over hang to prevent to need for supports in that area. The driving bands should be 1.625" and not exceed 1.630". I will publish a final version once testing has completed and remove this post.
335
5
40MM "NippleRound" Projectile
This is a projectile for a 40mm launcher that accepts a M182A1 Arty Sim. Ensure the rifle bands come out at 1.620-1.625" and the diameter for the cas…
196
5
NippleRound-AirBurst-m781
This is a 40mm projectile designed to accept arty sims- either the air burst or the point detonate versions. Print with 100% infill with PLA, no supp…
156
6
bb40ppd001-pusher
I recommend using PLA, 0.15mm layer height, 100% infill, tree style support (from build plate only). You may have to scale the object to get the corr…
155
6
bb40ppd001-nosecone
I recommend using PLA, 0.15mm layer height, 100% infill, tree style support (from build plate only). You may have to scale the object to get the corr…
Twitter
Matrix
Source
