Sig 238 on Tiny 11 Frame, Having some issues with basic PLA so giving a reprint in better materials. But cycles and fires well Printed at 99% Infill, Dont mind the dirty ahh grips im printing new ones

My UMP 11/9 Using the MPRTech and remix files in Overture Super/Professional PLA+ for the body and Polymaker HT PLA for the magazines. MPA bolt, Senjutsu-TekinaSeido hardware and trunnion kit, slim 9mm blastcan.

No Comment

99% Infill PLA+ on Carbon 2

The Hi Point EBT, From AWCY and Lukewarmdesigns. Coming Soon An improved Hi point C9/ c380 frame with railed options. Also includes fixes to LRHO and Pin location inconsistency issue with negatives that are measured via a jig, and placed with a negative in orcaslicer. Print in 100% Infill with HobbyLobby PLA+, with Folding Pistol Brace file

Allow me to present you :the most disgusting AR build

Bufferless lower with telescoping brace BCA bolt action upper with 6in 300blk barrel shoots flawlessly suppressed/unsuppressed

Normal FTN enjoyer PLAR in 300blk with FTN4 rifle K rebar V2 final strike glock 19 with FTN4 metal booster Dear22 with FTN5 rimfire tucked in

DeAR-22 M7 remix

DeAR-22 M7 remix printed in Siraya Tech Fibreheart PPA-GF Dedicated .22LR Black Nitride BCG w/ 4.5" threaded barrel FCG Reinforcement Plates from Riptide Rails Quick Disconnect Heat Inserts from Hyperion 2A

DeAR-22 M7 upper from ciwielab Little Guy Giessele DeAR-22 Handguard from ciwielab DeAR-22 M7 lower remix w/ extended pic rail from Foaps Files S&W M&P15-22 Mag from Foaps Files Soaked Noodle (Kitties) from Middleton Made Flash Hider from unseenkiller/nightalliance PWC 5.7 release Dewclaw Rail Panels from Southpaw Precision

Simple and cheap, Just how i like em. Basic FMDA SD9 Frame with 40 dollar Gunbroker special kit, alongside some rails from riptiderails. all in all even with mag the build was sub 100 dollars and printed amazing on the Carbon 2 in PLA+ at 99% Infill. Mag Release is a bit of a pain on these however, i can see the need for unseens glock mag remix lol. But im happy with end results.

Another build of mine!

A Broken Bullets BB26x in PA6 GF, with PA6 CF magwell, Glock 27 slide with a G32 .357 Sig threaded barrel. This was built after countless hours of trial and error with printing Nylon. At first oven baking and using my old bed slinger...a Elegoo Neptune 4 pro, started getting some good prints, and horrific clogs...then got it dialed in with my Elegoo Centauri Carbon.

Around 250 to 300 rounds through it, holding strong. I carry it everwhere, and its my hunting sidearm...handles extreme temp changes very well.

Chairmanwon 26XX Polymaker PLA pro 100% infill. 45° orange/white

Beta build with safety, Glock 22 slide with a Meta Tactical .40 cal. 16 inch barrel, in Overture PLA professional.

The build was a fun test on how well I could problem solve a decently complicated project. The buffer tube, for example, stuck out too far for me, so I made a modified version of the butt plate that is extended, and when I was ordering parts, Ohhunts ran out of gen 1 rails and I never realized how different gen 2 rails were, so I had to modify the locking block and spent way too much time filing. It at least fires sometimes! I just would like to figure out why it fires on safe and the trigger dies after every shot.

Quick and simple G17, using a offbrand threaded barrel and gatalog DD17.2 Frame. kit was about 200 dollars before rails and mag. 99% Infill in Sunlu PLA+ on Carbon 2

Ruger 1022 in Damascus-2A's "Lil' Piglet" bullpup chassis.

-- 2-tone Black/White PLA+ "mismatch scheme" -- Modified Mag-release -- Picatinny Shell-holder

The Beretta U22 SoundShock Neo By Gatalog, Nabbed a kit on Gunbroker for just shy of 200. Printed on Bambu A1 Mini with Sunlu PLA+ in 99% Infill. Featured in unfinished state on 3D2A.TV Star Wars Episode lol. Shoots smooth too, overall pricey but would recommend

A Simple OEM G43 Build in rose gold, kit was around 250 from gunbroker on a FDMA D43.1 Frame in 100% infill with Pink PLA+ Sunlu Filament had some slight trigger reset issues but it resolved itself after break in, now she shoots great

The Glock of Theseus, My eBay g19 special Been install across 5 or so frames now and changes so many small bits to fix small ling long issues. But after much work (n money) it runs fantastic Plus cheaply threaded barrel I picked up cheap 99% infill printed in Bambu A1 Mini

Simple SW M&P 40 from a sub $120 GB kit, using both white and pink (i ran out of white) PLA+, 99% Infill and shoots amazing

1 of many

An SCFree frame PA6-CF, using an oem lpk minus my custom shoe, and s15 mag catch. Upper is a PATMOS Revelation 48 slide, with a Griffin Barrel, Griffin Micro Comp, gen 3 style recoil system, my printed co witness sights, and a Gideon Optics Judge on the top.

Overall one of my favorite builds, thanks for any and all input,

Much love

• AA13FIREARMS (anonanarchist13)

Sneak peak into the collection, no I don't have a problem MOM!

Collection of multiple gens of C9/ C380/ JCP40/ JCP45 across multiple frames, all beaten to hell and tested to failure n back The true "Blue Collar Blaster"

Stay tuned for the EBT from AWCY!