Hi! This is my second build, first one was a Yeet 22 Hammer. This one is a Wisp 22LR with PSR stock, PSG1 grip, shortened mag to 10 round, 12inches Mlok handgguard and Saturn S1 suppressor. Almost everything was made on PLA+, but FCG, BCG and suppressor on ABS. Barrel was scavenged from a spring gun. I hope you like it! Can´t stop the signal.

120 Buck Taurus G2c Build with a gold lakeline threaded barrel included in the gunbroker kit. Matching with yellow Sunlu PLA+ In Yellow. Well over 50rds through it and happy as can be

This is the "Chode M" option of a midsized-grip and a compact slide with an FN 509 parts kit. This was printed using Polymaker Fiberon PA612-CF15.

The flowers were engraved using 3D Builder's emboss tool, and then I painted them with a bit of primer, acrylic paint markers/pens, and then a light matte sealant coat from Rustoleum.

The ambi mag release drops the magazine fully, the ambi-slide lock works, and it passes all function tests.

I purchased a coiled roll pin from Apex Tactical which made the locking block installation significantly easier after some assembly lubricant, and I highly recommend anyone looking to build an FNS or 509 do the same. I'd say like a Glock, this took 20-25 minutes to build after some practice.

Idk why the slide sticks out partly past the frame, but…

The Rastung Matz 5 aka RM5 detent delayed blowback 9mm AR that uses all off the shelf parts and some SCS plates. In development and testing this weekend at Gun Makers Match!

Decimator-22 Variant: The Fae-Ko

This was just a simple Decimator-22 v3 build utilizing the Galileo R2 barrel nut and handguard. Modeled a slant cut muzzle device that would spit fire 5 inch barrel to help from Print-a-22 Wha-sir AK pistol grip Cheapy amazon red-dot 3dss Flip safety.

For the handguard i wanted something different then just black, so after trying, and failing to make a handguard out of real wood, i decided to lookup how to make pla look like wood, and thus gave the result above!

A Kimmel AP9 in PLA+ Extra Points for swag

Czech-Box

Quick and dirty 380acp mod for the ssszar. Frame modified in orcaslicer. 380acp bolt is missing the feature that resets the SS linkage. Reprinted the feature and glued it down.

This is my 350 Legend Trash Panda build, which I'll be using this hunting season! It uses a BCA 350 Legend barrel and is fitted with a 1989 Japanese TASCO 3x9 (with period correct scope rings even). I make slings out of leather thrift store belts when I get drunk, so that's what you're looking at here. The lever arms were cut by me out of the plate base from my old ender3 and the lever padded with leather I stole from a trashed couch. The bullet clip is a design I put together to clip into the holes along the barrel shroud. The main body as well as the linear comp were printed with SUNLU 2.0 PLA+ black and gray, the butt pad and hose clamp cover were printed in Inland TPU, and the barrel clam shell was printed in Inland PA6-CF.

DeCBAR-22 with 16" barrel.

Printed in PLA+, running BCA 16" .223 threaded barrel with CMMG Bravo bolt. I'm pretty happy with the trigger, although it has a lot of takeup and a kinda mushy release. overall very happy with the build. You should make one!

-ciwielab

The 2011 Beta by Nightalliance. Printed in Polymakers' beautiful mettalic blue PLA PRO, this frame has seen over 500 rounds 9mm with no issues but has since been retired for a newer version.

Pocket Pleaser in Hobby Lobby Mint Green PLA+ Rails from the cabbage patch, shoots amazing and even better to carry LCP Kit ran 84$ plus rails & shipping

NOT YET TESTED merged together the tri lug adapter from the triple pig release onto the blank insert from the FTN 5.1 EZ adapter

2x Taurus G3's. Both Under 100$ Printed in White Sunlu PLA+ & Hobby Lobby Pink PLA

This is my second 3d printed firearm which is the Harlot V1. The first was a songbird I modfied to have a shorter barrel so it would fit on my Ender 3. But this was way before I realized you can't print firearm parts out of regural PLA, so this piece is only for display. I modified the model to have a sucbbus on the handle which I used red paint on and shorten the barrel.

ATRH’s remix of the Ruger SR9C printed in Inslogic PA6-CF

My Vault Hunter Trash Panda Special Edition chambered in 300BLK. It’s printed in Sunlu PA6-CF and PA6-GF. The barrel is a Bear Creek Arsenal stainless fluted barrel.

If it took more than one shot you weren’t using a Jakobs.

This is my remix of the Modelo Polytactico to be more lefty friendly. Uses home made 43R shotshells and all modded files can be found on Odysee @AFTagent.

UMP 11/9 with a 16" barrel that has a fake suppressor barrel sleeve. Uses surplus Sten gun mags or any printed sten gun mags.

Remix of the standard top eject decker with easier reinforcement install plus offset sights. Modded files can be found @AFTagent on Odysee.

This is my remix of the standard BALR built to use a left eject bolt and modified files found on Odysee @AFTagent. This one was built to use .300 blackout.