307
6
View this release
Alternative links
A jig for holding the 3x7x5 din 705 shaft collar and 3mm rod in place for making the FGC-9 mk2 firing pin. The cutout lenght is exactly 67,50 mm. This is a beta release that has not been thorougly tested yet..if you print this and try it out please let me know of the results, tell which slicing/print settings you used etc.
LBRY Tags: fgc9 mk2; fgc9; firing pin; fgc9 mk2 firing pin; fgc-9 mk2 firing pin
LBRY Tags: fgc9 mk2; fgc9; firing pin; fgc9 mk2 firing pin; fgc-9 mk2 firing pin
Related to This Release
292
12
FGC-9 firing pin jig beta v 1.1
Another attempt at firing pin jig, with numbers. all the numbered slots have different tolerances. if you print and try this, let me know which one o…
835
13
Improved Striker Orifice Jig for FGC-9 Bolt Manufacture
The purpose of the above-mentioned jig is to significantly increase the success-rate of FGC-9 bolt manufacturing by drilling the striker orifice (and…
113
6
UNTESTED - FGC-9_MkII PCC Drum Lower version 1.1
I have a promag drum and it doesnt fit the magwell. I don't want force a fit using a dremel so this is a modified lower. This has come from the small…
776
13
FGC-9 FCG Anti-rotation Pins Support Cut
Modified lower for anti-rotation pins!
LBRY Tags: fgc-9; lower; anti-rotation; pins; fcg
218
10
Stingray 1913 rail for standard FGC-9 buffer V1.1
Rear 1913 rail for use with the Stingray upper and regular FGC-9 buffer tube.
12/16/23 - Added slightly stronger V1.1 version
LBRY Tags: fgc-9; buff…
Twitter
Matrix
Source
