249
7
This fixes the issue of bolt carrier eclips not being properly retained in the trunnions of the 3dp90. Spacer is 3.5mm, which worked for me, you may need to adjust for your setup.
Related to This Release
781
17
Point Defiance 3dp90 steel bolt 2.0
3dp90 steel bolt version 2, this relieved version functions fine. Included are details about improved bolt guide rods using long 8-32 bolts, no e-cl…
668
11
AWCY? 3DP90 Three-Angle Clamshells
Plain 3DP90 Clamshells with a little extra flare. The AWCY logo is missing from the front (original file was missing an eye, and couldn't find a rep…
386
10
VZ61 Barrel Thread adapter V2
This is a VZ61 thread adapter. It uses the factory collar for retention and adapts to a 5/8 thread. Note, should be printed in nylon and will require…
292
9
Extended AWCY Burnt Bacon
Extended AWCY Burnt Bacon to hide ugly 16" barrels, sized for the 3dP90, but will likely fit most things without a gas block. ***NOTE*** This is inte…
221
9
3dp90 pourguard 0.1 tolerance
Improved pour guard for the 3dp90. This pourguard will actually stick into the bolt housing. You can then use a bent coathanger placed in the outsi…
Twitter
Matrix
Source
