668
14
this is a break action 37mm launcher. it uses a 1 5/8" steel tube with a 39-39.5mm ID as a barrel liner, an ar15 firing pin an AR15 FCG, an ar style push button safety (inserted upside down, with a detent, half a detent spring, held in place with a 8-32 set screw) , and a stock or pistol grip for a mossberg 500.
the only specialized part is the breach face, which is a 1/4" thick, 3/4" od rod with a 3mm hole down the center so that an ar15 firing pin can be inserted. The firing pin should have a approximately 55mm long 7.4mm OD spring to prevent it from over protruding.
the plunger needs a 5/16 2' long compression spring, the latch requires a 1/4" od 5/8" long spring to latch correctly.
549
15
1
BETA: cp33 30 round magazine
this is a 3d printed double stack version of the CP33 magazine. It requires the Spring and follower of a sig P322 25 round magazine. it needs to be p…
380
13
can cannon top rail
this is a barrel sleeve and top rail designed to fit on a can cannon. It requires 3x 1" 10-32 or 10x24 set screws to keep the rear piece from sliding…
424
10
BETA: A1/A4 hybrid upper
this is an A1 slick side upper with a shell deflector and a pic rail. It uses a1 style rear sights. it would need to be CNCed in aluminum to work
348
11
2
Club Foot Sopmod stock
this is a modified sopmod stock that has a curved butt plate, it should help with stability while wearing armor.
Twitter
Matrix
Source
