70
3
This tool holds 37mm hulls for primer removal. It is placed in a vise. make sure to keep the vice jaws open enough to allow the 209 primer to be tapped out of the hull.
Related to This Release
856
16
37mm Triple Banger (15mm x3)
Allows your 37mm launcher to fire x3 or x2 diy or commercial 15mm rounds, using a 209 primer.
Ramset variant is still under development.
DO NOT ADD B…
814
9
HEDB 37mm Threaded Base Pack
The idea behind the project was for a 'modular' 37mm round. Threaded bases
and projectiles could be reloaded in large quantities, while only requirin…
645
13
Billet MILC Support Files V2
Printed Files for the Billet MILC & Hydra 37mm Hulls. Updated to include M781 Projos that don't use the glue in insert.
LBRY Tags: milc; hydra; bil…
315
19
37MM Ported Barrel Drilling Jig
This is a jig that clamps on to 1.5” tubing used for 37MM barrels. There is 2 models included.
- Filing Clamp - This uses less material and gives a …
135
7
Apache 3800 37mm Storage grid
This is a 3d printed insert for the apache 3800 case from harbor freight.
It can be printed on most printers if they are capable of printing 190mm x…
Twitter
Matrix
Source
