481
11
This lower is designed to work with a bear creek arsenal side charging upper.
It requires
-1x AR FCG
-1x carbine buffer tube kit (no castle nut or back plate)
-1x buffer detent and spring
-1x usgi mag release
-1x bolt hold open
-1x ar pistol grip
-1x 3-48 1.5” screw (for pinning the bolt hold open in place)
-4x 6-32 2” socket head screws (for reinforcing back section)
-1x 6-32 1” socket head screw (for reinforcing the pistol grip)
-1x 8-32 square nut and 5/8” 8-32 socket head screw (for indexing the buffer tube)
-2x ¼” 1.5” long screw posts or hitch pins
LBRY Tags: ar lower; lower; ar
It requires
-1x AR FCG
-1x carbine buffer tube kit (no castle nut or back plate)
-1x buffer detent and spring
-1x usgi mag release
-1x bolt hold open
-1x ar pistol grip
-1x 3-48 1.5” screw (for pinning the bolt hold open in place)
-4x 6-32 2” socket head screws (for reinforcing back section)
-1x 6-32 1” socket head screw (for reinforcing the pistol grip)
-1x 8-32 square nut and 5/8” 8-32 socket head screw (for indexing the buffer tube)
-2x ¼” 1.5” long screw posts or hitch pins
LBRY Tags: ar lower; lower; ar
Related to This Release
1432
32
bull pup rimfire magnum AR lower .22 mag or .17 HMR
this build requires a bear creek arsenal side charging .22 magnum or 17 hmr upper to work. I use a 17 hmr 7.5" bbl and it only cycles reliably unsupr…
1132
24
BETA: chonkey boi lower for mil spec upper, v6
to assemble the lower you need the following:
-4x 2" 6-32 socket head screws (inserted through the back to strengthen the receiver extension)
-2x 1" …
614
18
22 cal AR 322 mag round body v2
this is a pistol that uses a CMMG ar22 bolt carrier and barrel, and sig p322 magazines and mag release.
hardware required:
-1x 8-32 1 1/4" socket h…
744
14
updated: AR lower Ak magwell single stack for BCA 7.62x39 uppers
i made minor modifications to my original design. This one clears the bolt carrier but I don't have a 7.62 upper or 7.62x39 snap caps to test.
hard…
483
10
AR lower mini30 mag well for BCA side charging 7.62 upper BETA
this is a lower that lets you use ruger mini 30 7.62x39 OEM factory mags in a Bear Creek Arsenal 7.62x39 side charging upper.
it requires
-1 oem rug…
Twitter
Matrix
Source
