614
18
this is a pistol that uses a CMMG ar22 bolt carrier and barrel, and sig p322 magazines and mag release.
hardware required:
-1x 8-32 1 1/4" socket head screw (to act as a pivot pin)
-1x 1.5" 1/4 od screw post (to act as a take down pin)
-1x 1" 1/4 od scree post (to attach the pistol grip)
-2x 1.5" 6-32 socket head screws (to reinforce the back end)
-1x 1" 6-32 socket head screw (to reinforce the pistol grip)
-1x cmmg ar22 bolt carrier and barrel
-1x sig p322 mag release
-1x sig p322 magazine (25 round mags must be loaded to 20 rounds to feed reliably)
-1x usgi charging handle OR just print the one provided
-1x usgi AR FCG
hardware required:
-1x 8-32 1 1/4" socket head screw (to act as a pivot pin)
-1x 1.5" 1/4 od screw post (to act as a take down pin)
-1x 1" 1/4 od scree post (to attach the pistol grip)
-2x 1.5" 6-32 socket head screws (to reinforce the back end)
-1x 1" 6-32 socket head screw (to reinforce the pistol grip)
-1x cmmg ar22 bolt carrier and barrel
-1x sig p322 mag release
-1x sig p322 magazine (25 round mags must be loaded to 20 rounds to feed reliably)
-1x usgi charging handle OR just print the one provided
-1x usgi AR FCG
Related to This Release
1432
32
bull pup rimfire magnum AR lower .22 mag or .17 HMR
this build requires a bear creek arsenal side charging .22 magnum or 17 hmr upper to work. I use a 17 hmr 7.5" bbl and it only cycles reliably unsupr…
1176
25
BETA Pmag style AR 22 mag with LRBHO
this is a 3d printable AR22 mag that looks like a P mag but works in conjunction with a Catch 22 Bolt catch and spring.
ar 22 mag springs can be pur…
1132
24
BETA: chonkey boi lower for mil spec upper, v6
to assemble the lower you need the following:
-4x 2" 6-32 socket head screws (inserted through the back to strengthen the receiver extension)
-2x 1" …
809
19
ar 22 pistol with p322 mag well
this is a ar22 that uses a cmmg designated 22 bolt carrier and 4.5" barrel and uses sig p322 20 or 25 round magazine.
requires a 8-32 1.5" screw for…
746
12
DeAR22 ScARpion 30 round mag v2
DeAR 30 round magazine remix with anti tilt follower, I made adjustments to the dimensions for a better fitting base plate and these mags should drop…
Twitter
Matrix
Source
