1057
15
This is a 1/2-28 Thread adapter to use your VP22/VC-22 Muzzle Devices on your threaded .22LR/.22WMR Barrel. This has been tested with multiple Muzzle Devices and works very well, I have added a groove for use of a 7/8" Open-End Wrench or Adjustable Crescent Wrench to make things easier.
I have made the threads slightly tighter than normal so you can cut the rest through installation, use of a large diameter Cleaning Rod is suggested to leave protruded through the barrel to assist in concentric installation when first installing the device.
Link to GCI Muzzle Devices:
https://odysee.com/@Gun_Cad_Ideas:e/GCI-BARREL-ACCESSORIES:7
Please use this adapter responsibly, this adapter is meant for use with Flash Cans and Flash Hiders, while Suppressor use is possible you should only due so in accordance with State and Federal Laws. Please, be responsible.
LBRY Tags: vp22; vc22; flash can; muzzle device; adapter
I have made the threads slightly tighter than normal so you can cut the rest through installation, use of a large diameter Cleaning Rod is suggested to leave protruded through the barrel to assist in concentric installation when first installing the device.
Link to GCI Muzzle Devices:
https://odysee.com/@Gun_Cad_Ideas:e/GCI-BARREL-ACCESSORIES:7
Please use this adapter responsibly, this adapter is meant for use with Flash Cans and Flash Hiders, while Suppressor use is possible you should only due so in accordance with State and Federal Laws. Please, be responsible.
LBRY Tags: vp22; vc22; flash can; muzzle device; adapter
Related to This Release
1267
25
Budget Press Fit 22LR Upper
This is a modified A3 UR Lite upper that has no deflector, dust cover, gas tube hole, or forward assist that has been reinforced at the front. This u…
379
11
SBT Evo Brace Shims (CZ Scorpion Evo 3)
SBT Evo Brace Shims (CZ Scorpion Evo 3): Laffs Dynamics
A set of three shims to fit between SB Tactical stabilizing braces for CZ Scorpion Evo pisto…
554
6
Grip for Hoffman Tactical Lower V2.5, V2.6, V2.7
Grip for Hoffman Tactical Lower V2.5, V2.6, V2.7
Mirror: https://www.thingiverse.com/thing:4949228
I modified the FossCAD MOE grip to make it symmet…
279
7
Trigger cut jig for 3 position AKSS/ AK FRT
READ THE README
Consider this beta due to all the variants and multiple configurations available.
This is a trigger cut jig to use with S3igu2's A…
98
5
.308 Winchester (7.62x51mm NATO) 10 Round Ammo Box
.308 Wincheser (7.62x51mm NATO) 10rd Ammo Box
I used the Vilcoyote77 7.62x39 50rds box as the basis of this box, but there's really no specific part…
Twitter
Matrix
Source
