447
15
View this release
Alternative links
Version 2 of this magazine update consists of an updated mag body for the 25rd magazine and updated baseplate, as well as an all new 10rd 380 magazine. Follower is the same for both magazines. The 25rd latch is the same as in the Decker official release. All parts needed for printing and making both updated mags are included in this zip.
The update rounds the rear of the magazine to make it more comfortable to hold and manipulate. Additionally, small holes places in the back of the mag body to show rounds remaining at 5 round intervals.
PRINTING INSTRUCTIONS:
Original Decker instructions say 99% infill with 10 walls. You can do that, but honestly I've found that 7 walls, 70% infill is MORE than enough strength for the mag body, mag baseplate and latch. I think the follower should still be 10 walls, 99% infill, however, since the bolt protrusion strikes it on empty. Print in same orientation as original files. STLs should be in correct position already here. NO SUPPORTS!
ADDITIONAL ITEMS NEEDED:
1x M5 x 25mm socket screw (just like original mag)
Lowe's Compression Spring (same as original) - You'll need 2 for the 25rd mag and 1 for the 10rd mag.
LBRY Tags: decker; 3d2a; decker 380; 380 decker; printed guns
The update rounds the rear of the magazine to make it more comfortable to hold and manipulate. Additionally, small holes places in the back of the mag body to show rounds remaining at 5 round intervals.
PRINTING INSTRUCTIONS:
Original Decker instructions say 99% infill with 10 walls. You can do that, but honestly I've found that 7 walls, 70% infill is MORE than enough strength for the mag body, mag baseplate and latch. I think the follower should still be 10 walls, 99% infill, however, since the bolt protrusion strikes it on empty. Print in same orientation as original files. STLs should be in correct position already here. NO SUPPORTS!
ADDITIONAL ITEMS NEEDED:
1x M5 x 25mm socket screw (just like original mag)
Lowe's Compression Spring (same as original) - You'll need 2 for the 25rd mag and 1 for the 10rd mag.
LBRY Tags: decker; 3d2a; decker 380; 380 decker; printed guns
Related to This Release
138
5
Decker 380 Secure Mag Pouch
My own modification of the universal rifle pouch by FecalDisco (full credit to him for the original design).
25rd Decker mags will fit in an AR-15 …
200
13
380 Decker Single Spring Short Magazine
This magazine is just a short version of the original decker magazine. It uses the same main spring, but only one.
It does not function any better t…
190
5
Decker 380 Full Length Rail
What can I say? I love guns and I love rails. I like my rails long AF too. Luckily, I also like to share my rails.
So if you want a rail, you can hav…
44
2
Decker 380 Railed Dust Cover
I railed the dust cover.
I'm not proud of it, but I did rail the dust cover.
Any optic you put on this dust cover will likely shift, the amount of sh…
641
8
.380 Decker - Build Guide Translations
A work in progress. I will be translating the Decker .380 build guide into multiple languages as time permits. As of this moment, the zip contains a …
Twitter
Matrix
Source
