288
7
Typhoon Evo K Grip (CZ Scorpion Evo 3): Laffs Dynamics
Shortened variant of the original Laffs Dynamics Typhoon Evo Grip.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm, so it doesn't stick out the side)
1x M4 Hex Nut
Shortened variant of the original Laffs Dynamics Typhoon Evo Grip.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm, so it doesn't stick out the side)
1x M4 Hex Nut
Related to This Release
493
2
Waffle AK-74M/101 Tanker Magazine (20rd)
Waffle AK-74M/101 Tanker Magazine (20rd): Laffs
Waffle patterned 3DP dual caliber AK platform magazine, for use in AKs chambered in 5.45x39, or 5.56…
270
11
Close Quarters Evo Grip, Cutback (CZ Scorpion Evo 3)
Close Quarters Evo Grip, Cutback (CZ Scorpion Evo 3): Laffs Dynamics
A large, curved, forward angle grip for use in close quarters engagements. Has …
73
21A Mycelium Panels V1.1
Mycelium Beretta 21A Bobcat Grip Panels V1.1: Laffs Dynamics
Update V1.1: Added Trigger Cut Relieved Panel Set.
Printer Used: Ender 3 V2
Filame…
69
1
Gator Skin Grip Panels (Ruger Wrangler)
Gator Skin Wrangler Grip Panels: Laffs Dynamics
Grip panels for the Ruger Wrangler revolver, embossed with a stylized gator skin pattern on each pan…
40
3
Harlot UFA Grip Spacer Improved
Have you ever wanted to fine-tune your Harlot chisel tip screw (striker) without completely disassembling your masterpiece? Well, now you can. This…
Twitter
Matrix
Source
