832
19
1:1 Recreation — FFT TY22/Taurus TX22 FRT Disconnector
This is a "1:1" recreation of the FFT TY22 FRT disconnector, and it’s by far the closest match to the original TY22/FFT design. I put this together because most of the other TX22 FRT variations out there (Big Brrt, Gartech style, and even my own “Rimfire Ripper”) struggle to run a full mag reliably. The main issue is the reset area which is usually not flat enough to push the trigger bar forward, which means you don’t always get a consistent reset. This version should help fix that problem.
Specs for Laser Cutting / Printing
Laser Cut (SCS): 304 stainless steel, 1.9 mm thick
3D Print: PLA+ or Nylon, 100% infill, 0.15 mm layer height, ~190 °C
LBRY Tags: ty22; frt; tx22; 3d2a; nnwdev
767
23
tx22 comp v3
tx22 compensator that helps with muzzle climb during frt rates of fire. this is modifiable if you want but requires an m4x25mm screw and m4 nut, the …
1112
16
TX22 100rnd Drum
Majority Printed TX22 DRUM
FRT MAY WORK NO GUARANTEE
In testing the TX22 with the FRT paired with the drum had to fast of a rate
of fire meaning …
478
9
TS22v2 a TX22 FRT Disconnector
"TS22 aka Tickle Switch 22" FRT Disconnector
The TS22 aka the “Tickle Switch 22” is a forced-reset disconnector modeled after the stock TX-22 discon…
84
3
2
tx22 frt disconnector
dxf for sendcutsend/metal fabrication availabilty
stl for 3d printing
cut with 4130 chromoly or grade 5 titanium @1.6mm for best results
print with …
Twitter
Matrix
Source
