767
23
tx22 compensator that helps with muzzle climb during frt rates of fire. this is modifiable if you want but requires an m4x25mm screw and m4 nut, the threads are for 1/2x28 and only rated for 22lr pistols. print this in pa6cf as pla+ is way too weak and will deform under heat and gas pressure. print muzzle end up with supports on build plate only DO NOT SUPPORT THREADS.
1723
37
124
22 go pew
22lr suppressor. 7.5 and 4 inch available
2326
20
Whorelok .22LR Suppressor
This is the Whorelok .22LR Suppressor. The build inspiration came from the Si-Co Warlok 2, an aluminium ultra-lite can with an outer diameter of one …
832
19
1:1 TY22
1:1 Recreation — FFT TY22/Taurus TX22 FRT Disconnector
This is a "1:1" recreation of the FFT TY22 FRT disconnector, and it’s by far the closest matc…
566
12
.22LR shushy thingy
.22Lr suppressor, designed and tested by me :D not that many rounds but roughly 200. ()
Did Finite Element Analysis (FEA) on it and it's supposed to …
Twitter
Matrix
Source
