141
2
View this release
Alternative links
I have updated to a V2022 version this version should take out the barrel wobble.
-
this is the UAL version of the T15 “lower” so this means more parts to reprint in case you already have the standard FGC68TE.
but this does make it a direct feed with your T15 V2 mags so you can use them to shoot first strike rounds. if you have TCR or a TiPX long range kit or something in that nature…
it’s also possible to use the V1 magazines but the 2 screws on the top of the mag are in the way. so if you don’t mind making a small mod to your breach block then it should work fine
in case you have just a regular TIPX breach block for round ball use then you can still use this set. just keep in mind that you can’t use first strike rounds in that case.
the starter set can be found here:
https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe
the collection of FGC68 parts can be found here:
FGC68 MKII
https://www.printables.com/social/180009-untangleworks/collections/88908
FGC68 MKI (this set is not made for the MKI version)
https://www.printables.com/social/180009-untangleworks/collections/88907
a video about this lower will be made later:
some of the installation steps that are different from the TIPX lower can be fund in the images for now
parts needed for mag catch.
1x spring 6mm OD, 0.5mm wire, 20mm long
1x m3 bolt in a length of 30mm
1x m3 washer
1x metal pin 4mm OD, 27mm long (a 3d printed part can be used for this)
movies:
UNW FGC68MKII new lowers for the T15, TMC and Dmag / helix mags for this magfed paintball marker
https://www.youtube.com/watch?v=xjbmq-A3C3c
https://odysee.com/@UntangleWORKS:a/UNW-FGC68MKII-new-lowers-low:f
FGC68 a small update on the installation of the new lowers for TMC T15 Dmag mags
https://www.youtube.com/watch?v=PwSyvEeVHTk
https://odysee.com/@UntangleWORKS:a/FGC68-Bolt-update-on-lower:a
LBRY Tags: fgc68; fgc68mkii; first strike t15; paintball; magfed
-
this is the UAL version of the T15 “lower” so this means more parts to reprint in case you already have the standard FGC68TE.
but this does make it a direct feed with your T15 V2 mags so you can use them to shoot first strike rounds. if you have TCR or a TiPX long range kit or something in that nature…
it’s also possible to use the V1 magazines but the 2 screws on the top of the mag are in the way. so if you don’t mind making a small mod to your breach block then it should work fine
in case you have just a regular TIPX breach block for round ball use then you can still use this set. just keep in mind that you can’t use first strike rounds in that case.
the starter set can be found here:
https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe
the collection of FGC68 parts can be found here:
FGC68 MKII
https://www.printables.com/social/180009-untangleworks/collections/88908
FGC68 MKI (this set is not made for the MKI version)
https://www.printables.com/social/180009-untangleworks/collections/88907
a video about this lower will be made later:
some of the installation steps that are different from the TIPX lower can be fund in the images for now
parts needed for mag catch.
1x spring 6mm OD, 0.5mm wire, 20mm long
1x m3 bolt in a length of 30mm
1x m3 washer
1x metal pin 4mm OD, 27mm long (a 3d printed part can be used for this)
movies:
UNW FGC68MKII new lowers for the T15, TMC and Dmag / helix mags for this magfed paintball marker
https://www.youtube.com/watch?v=xjbmq-A3C3c
https://odysee.com/@UntangleWORKS:a/UNW-FGC68MKII-new-lowers-low:f
FGC68 a small update on the installation of the new lowers for TMC T15 Dmag mags
https://www.youtube.com/watch?v=PwSyvEeVHTk
https://odysee.com/@UntangleWORKS:a/FGC68-Bolt-update-on-lower:a
LBRY Tags: fgc68; fgc68mkii; first strike t15; paintball; magfed
Related to This Release
191
2
FGC68 MKII tipx edition: Dye tactical mag / planet eclipse CF20 UAL Upper and lower set for paintball first strike use
this lower and Upper will work with the basic FGC68-MKII parts. except for a view buffer tubes models but replacement parts have been added.
this set…
131
2
FGC-68TMC a FGC-9 MKII styled re-skin kit for the Tippmann TMC paintball magfed marker
there are 2 editions in this set, the model with the MKII rail on top. and the NORA edition NORA meaning NO RAil. this set was made to give the TMC t…
238
2
FGC-68 MKII honeybadger MKII rail and UNW low rail shroud set for your FGC-9 magfed paintball marker
this is the shroud set is based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of dif…
84
FGC-68 MKII 227-300 MKII rail and UNW low rail shroud set for the FGC-9 Paintball marker
this is the shroud set is based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of di…
192
5
FGC-6 G&G MKII Combat Machine: FGC-9 MKII styled airsoft AEG replica re-skin kit set
building this one is less fun then the FGC-6 FGC-6FA or FGC-6S since it's less DIY. but well it should be a lot more easy to have something reliable …
Twitter
Matrix
Source
