Join our Lemmy instance, now the official landing spot of /r/FOSSCAD
Release image
192 5
Author thumbnail

FGC-6 G&G MKII Combat Machine: FGC-9 MKII styled airsoft AEG replica re-skin kit set

@UntangleWORKS 19.5MiB Released July 31, 2022, 2:44 PM 0.010LBC 0 Reposts
View this release Odysee LBRY Desktop
Share
Index Forum Twitter
6mm BB 9x19mm FGC-6 FGC-9 Airsoft Gun Hybrid Firearm
building this one is less fun then the FGC-6 FGC-6FA or FGC-6S since it's less DIY. but well it should be a lot more easy to have something reliable to practise with. or just have fun with shooting semi and full auto. in a hi cap or real cap format. what ever your taste is... this is the complete set of the FGC-6 G&G that have been made so far. the newer shroud models and UNW Low rails models have not been added. since this model of all the FGC-6's is the least interesting to me. jet you could say the best working one since it's just a re-skin kit basically... that should not effect the performance of your base replica

this M4 airsoft based AEG kit is made for the G&G Combat Machine. but it might work for other platforms as well. I would recommend looking first at the movie to see if the mounting points look a bit the same before starting out printing parts…

this rail kit will make it possible to use the FGC-6G&G shrouds on your G&G Combat Machine.
there is also a mounting point in the shroud for a outer barrel to be mounted on. this is currently only made for 1 shroud and barrel length. but this should be a part that can be easy made your self to a different size

you will need to use 2x M3 bolt 12mm long to mount the shroud block (“pin”)
and 3x M5 bolt 30mm long
and 2x M3 bolts of 10 or 12mm long for mounting the outer barrel

movie link:
https://odysee.com/@UntangleWORKS:a/UNW-FGC6GG:2
https://www.youtube.com/watch?v=Z54G9jBwDvg
this M4 airsoft based AEG kit is made for the G&G Combat Machine. but it might work for other platforms as well. I would recommend looking first at the movie to see if the mounting points look a bit the same before starting out printing parts…

this rail kit will make it possible to use the FGC-6G&G shrouds on your G&G Combat Machine.
there is also a mounting point in the shroud for a outer barrel to be mounted on. this is currently only made for 1 shroud and barrel length. but this should be a part that can be easy made your self to a different size

you will need to use 2x M3 bolt 12mm long to mount the shroud block (“pin”)
and 3x M5 bolt 30mm long
and 2x M3 bolts of 10 or 12mm long for mounting the outer barrel

movie link:
https://odysee.com/@UntangleWORKS:a/UNW-FGC6GG:2
https://www.youtube.com/watch?v=Z54G9jBwDvg

LBRY Tags: fgc; fgc-6; fgc-6 g&g; aeg; airsoft