199
8
View this release
Alternative links
If you are looking to replicate the SEAL build a little closer, here is a stubby front barrel section with no picatinny.
LBRY Tags: nt79; foss; 37mm; fosscad; 3d
LBRY Tags: nt79; foss; 37mm; fosscad; 3d
Related to This Release
306
9
NT79 Hybrid Chamber Main Barrel Sleeve
Main barrel sleeve for NT79 with hybrid chamber design found in @DannyMeatball:b 's launcher designs.
-6mm to account for hybrid chamber
Be wary as…
315
19
37MM Ported Barrel Drilling Jig
This is a jig that clamps on to 1.5” tubing used for 37MM barrels. There is 2 models included.
- Filing Clamp - This uses less material and gives a …
175
9
Stubbs Customs Wolfspistole Seamless Barrel Rings
This will allow you to use 30mm seamless tubing for the Wolfspistole. Print 2 of each ring. I recommend dry mock-up before gluing. Both rings have…
249
11
26.5mm Chalk Round
Fill with chalk. Close with earplug or whatever else you can stuff in there. I built up some hot glue and closed it off with that.
LBRY Tags: 37…
814
9
HEDB 37mm Threaded Base Pack
The idea behind the project was for a 'modular' 37mm round. Threaded bases
and projectiles could be reloaded in large quantities, while only requirin…
Twitter
Matrix
Source
