This is a captured recoil buffer intended to be used with the Slip Trip by @S3igu2:c for the full size and reverse stretch MP5 (buffer isn't needed on the K).
The recoil buffer is necessary to prevent the MP5 bolt carrier from getting stuck behind the AR-15 hammer when used with the Lee Sporting housing and other printable AR FCG housings available for the MP5.
Includes options for printing in TPU (preferred) or PLA+.
Slip Trip can be found here:
https://odysee.com/@S3igu2:c/Slip-Trip-V1-Open-Beta-V1:d
Credit for the original captured recoil buffer design goes to Nick B. at https://armamentusa.com/
LBRY Tags: slip trip; mp5; super safety; lee sporting; s3igu2
u/meatbanana42069 · 2024-07-18 14:14:01 UTC · score 1
I wasn't involved with the ARMP5 lower which was by UberPoor_ and S3igu2 (the lowers included in the original Super Safe MP5 package on my sea page made by myself and hertzofheimer were a remixes of the Unhappy_Arm4176 lower).
But the slip trip by s3igu2 + this recoil buffer should be compati…
u/meatbanana42069 · 2024-08-12 18:12:20 UTC · score 1
The recoil buffer isn't needed specifically for the slip trip, it only prevents the bolt from getting stuck behind the AR15 hammer (which is why the lee sporting housings come with recoil buffers), but if you have a file apparently you can round off the hammer enough to prevent the bolt from ge…
u/meatbanana42069 · 2024-07-13 18:28:39 UTC · score 6
This is a captured recoil buffer intended to be used with the Slip Trip by u/S3igu2 for the full size and reverse stretch Super Safe MP5 (I don't believe the buffer is needed on the K).
The recoil buffer is necessary to prevent the MP5 bolt carrier from getting stuck behind the AR-15 hammer w…
FRT-15 Trigger system
SSAK Captured Recoil Buffer
BETA - Mod9v2 Spring Buffer
Twitter
Matrix
Source
