134
3
View this release
Alternative links
This is a small buffer piece that goes between the recoil spring and carrier in your Mod9v2. Proven to reduce damage to carrier fin caused by the spring. So far tested at 500+ rounds rapid / double tap. Carrier showed no signs of stress or damage after testing.
This is intended for the 1.4mm WD x 12mm OD x 300mm long / McMaster part# 9637K83 spring that is recommended by Derwood in the latest Mod9v2 Odysee upload.
LBRY Tags: mod9; mussy; derwood; mod9v2
This is intended for the 1.4mm WD x 12mm OD x 300mm long / McMaster part# 9637K83 spring that is recommended by Derwood in the latest Mod9v2 Odysee upload.
LBRY Tags: mod9; mussy; derwood; mod9v2
Related to This Release
2336
24
1
Slip Trip Recoil Buffer
This is a captured recoil buffer intended to be used with the Slip Trip by @S3igu2:c for the full size and reverse stretch MP5 (buffer isn't needed o…
390
14
beta: 45 degree grip
i made this at the request of a friend, decided to post it here, it hasn't been printed yet so it may require fitting.
requires 8-32 sq nut and 8-32…
594
25
BORED BRAKE open beta
Barett inspired muzzle devices for all calibers under .50! thread adapted muzzle device is included so it hits all calibers available. print settings…
62
1
Trident Hinge Remix by DMTX
This is my remix of the Trident Brace Hinge from the Mod9v2 Mega Pack. I added a hole for a cross bolt to be
screwed in.
59
4
RMR cap sights V1
Set of raised iron sights made to fit an RMR cut slide. Can see over most legally purchased muzzle devices.
PLA+ 230/60, 99% infil with rafts at .2…
Twitter
Matrix
Source
