164
6
Anti Bounce Weight
Has serration for forward assist which extends a bit back to impact buffer, slowing down the bolt. A Rubber Pad can also be installed to further reduce rearward travel impact.
A separate Locking Pad is fixed in place with a piece of filament and soldering iron, can be rotated or replaced when worn out or milled from more durable material.
There are two versions:
. ABW Solid is intended for printing with no infill, later to be filled with metal powder
. ABW Slots has 2×5 mm and 1×3 mm slots intended for inserting metal rods
Sear Trip
The cutout is in the same spot as in the original BCG. The bottom is flat to better work with sliding sears. Lugs in the middle force it to reset during bolt travel.
LBRY Tags: cmmg; 22lr; guncad; trip; ar22
Has serration for forward assist which extends a bit back to impact buffer, slowing down the bolt. A Rubber Pad can also be installed to further reduce rearward travel impact.
A separate Locking Pad is fixed in place with a piece of filament and soldering iron, can be rotated or replaced when worn out or milled from more durable material.
There are two versions:
. ABW Solid is intended for printing with no infill, later to be filled with metal powder
. ABW Slots has 2×5 mm and 1×3 mm slots intended for inserting metal rods
Sear Trip
The cutout is in the same spot as in the original BCG. The bottom is flat to better work with sliding sears. Lugs in the middle force it to reset during bolt travel.
LBRY Tags: cmmg; 22lr; guncad; trip; ar22
Related to This Release
185
12
CMMG AR-15 22LR Single Stack Magazine
Here's my take on printable AR-15 22LR magazines for CMMG conversion kit and similar. The project started way back in 2018 and has been put on hold d…
142
4
Wushu DFCO AR15 Grip & DFCO Tiger Claw grip
Wushu DFCO AR15 Grip + Hand Stop + Plug V2
I have tested hundreds of settings and materials to find the right print profile for this grip, Printe…
102
7
CMMG AR-22 Buffer Plug v2
A plug designed to be inserted into buffer plug of AR-15 with CMMG 22LR conversions to keep said conversion pushed forward, increasing its reliabilit…
100
5
PMAG 30 Style AR .22lr Ceiner CMMG Conversion Magazine
PMAG Style AR 22lr Magazine 25rd
Top is easily replaceable in case of damage.
I included 2 styles of followers. The standard one which is the…
91
4
CMMG AR15 .22LR AR22 Buffer Spring Spacer
I made this spacer for CMMG .22LR conversion kits. It's installed in place of the stock AR15 buffer weight, and uses the stock AR15 buffer spring to …
Twitter
Matrix
Source
