508
13
Rook AKM Grip V1.1: FFFTech/FFFTechnology
An AKM grip with a straight backstrap and frontal section. Has ridges down the front, with an outwards extended toe.
A thumb rest is modeled into the left side of the grip. (See Note Below)
Overall thickness is 25.2mm
Update V1.1: Removed reinforcements.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
Notes:
1) For left handed shooters, simply use the "Mirror" setting in your preferred slicer software, so the thumb rest is
on the right side of the grip.
LBRY Tags: 3d printing; ak; ak47; firearms; grip
An AKM grip with a straight backstrap and frontal section. Has ridges down the front, with an outwards extended toe.
A thumb rest is modeled into the left side of the grip. (See Note Below)
Overall thickness is 25.2mm
Update V1.1: Removed reinforcements.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
Notes:
1) For left handed shooters, simply use the "Mirror" setting in your preferred slicer software, so the thumb rest is
on the right side of the grip.
LBRY Tags: 3d printing; ak; ak47; firearms; grip
Related to This Release
3068
37
4
Beer Brat Angled Grip
This Wisconsin cookout staple is now ready for your weapon! It's grippy, it's drippy, and it's ready to bippidy. This has been tested on metal and pr…
707
21
FBS-1 (AKM) V1.1.3
FBS-1 (AKM) V1.1.3: Laffs Dynamics
A fixed buttstock, similar in overall geometry to standard AKM buttstocks. The overall length of the design is ~1…
252
10
RDR T1 Minimal Mount
RDR T1 Minimal Mount: FFFTech/FFFTechnology
A mount for red dot optics that use the common Aimpoint T1 mounting footprint, similar in design to the …
794
17
Flared AR15 Magwell V1.1
Flared AR15 Magwell by Qwerm
A simple clamp-on flared magwell for AR-15's.
Orientation: Print on it's bottom face.
Changelog:
V1.1 - Added heat se…
302
6
Keymod AFG Angled Foregrip
Remix of Toxic Sandbox Keymod angled foregrip.
https://www.thingiverse.com/thing:2889845
Added lugs to to the grip to hold it in position. Cut away …
Twitter
Matrix
Source
