794
17
View this release
Alternative links
Flared AR15 Magwell by Qwerm
A simple clamp-on flared magwell for AR-15's.
Orientation: Print on it's bottom face.
Changelog:
V1.1 - Added heat set insert version.
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 5
Infill Percentage: 50-100%
Support: No
Fuzzy Skin: Enabled
Fuzzy Skin Thickness: 0.1mm
Fuzzy Skin Density: 10.0mm
Parts Needed:
2x M4 25mm Socket Cap Head Screws
2x M4 Nuts OR 2x M4 Heat Set Inserts
LBRY Tags: 3d printed; 3d printing; ar15; magwell
A simple clamp-on flared magwell for AR-15's.
Orientation: Print on it's bottom face.
Changelog:
V1.1 - Added heat set insert version.
Settings Used:
Material: PLA+
Extruder Temp: 210c
Bed Temp: 60c
Layer Height: 0.20mm
Wall Line Count: 5
Infill Percentage: 50-100%
Support: No
Fuzzy Skin: Enabled
Fuzzy Skin Thickness: 0.1mm
Fuzzy Skin Density: 10.0mm
Parts Needed:
2x M4 25mm Socket Cap Head Screws
2x M4 Nuts OR 2x M4 Heat Set Inserts
LBRY Tags: 3d printed; 3d printing; ar15; magwell
Related to This Release
1101
24
Strider Grip (AR-15)
Strider Grip (AR-15): Laffs Dynamics
A swept back, full length AR-15 grip with an extended toe to avoid hand slippage. Swells out from 22.3mm to 28.…
363
14
AKM Slipstream Grip V1.1
AKM Slipstream Grip V1.1: FFFTech/FFFTechnology
An AKM platform port of the 3FTech released Scorpion Evo 3 Slipstream Grip. This version has a small…
407
10
Dual DSMG Spade Grips
This is the DSMG model specifically for my double barrel ar15. https://defcad.com/library/a3863dc1-5116-47f7-918e-b8d09eeb36b4/
It can be set up wit…
125
4
AK trunnion rivet drill jig
Jig to hold your trunnions in place in your drill press vice so you can get the rivet locations on your receiver in the perfect spot. Works with 23…
119
4
Short AR Mag Pouch (REMIX)
Short AR Mag Pouch (REMIX) by Qwerm
A remix of @FecalDisco:e "3D printable molle universal rifle magazine pouch" that is shorter, allowing it to hol…
Twitter
Matrix
Source
