132
10
Chalk round for plastic 26.5mm hulls. Load your lift charge, slap in the disc then a little hot glue, slide the projectile on top and you're good to go. This is modified from the "26.5mm handbook" rounds, not my original design.
LBRY Tags: 26.5mm
LBRY Tags: 26.5mm
Related to This Release
762
11
Cherry Popper 26.5mm
Want to pop some cherrys but cant find fence post at your local hardware store?
Or do you just prefer the 26.5mm over 37mm?
Or maybye you just want t…
426
13
37mm Hornet finned round
Upscaled version of the "hornet" from the S.m.a.l.l.s. file pack. Includes a chalk, fused, and "Propaganda Delivery Device" version as well as Ramset…
249
11
26.5mm Chalk Round
Fill with chalk. Close with earplug or whatever else you can stuff in there. I built up some hot glue and closed it off with that.
LBRY Tags: 37…
228
10
26.5mm Adapter
uses 1 inch emt to make a 26.5 to 38mm adapter. use the base as the base (duh) and if you make a longer barrel, use the tip.
LBRY Tags: 26.5mm; 37mm
47
9
Plastic Hull Cup
Powder cup for plastic 26.5mm hulls. Mine came from "pyrobuild.com". Other plastic hulls are likely the same, but do some measuring and resizing if y…
Twitter
Matrix
Source
