267
4
View this release
Alternative links
California compliant stock and forward grip blocks to make a P-90 compliant. The one in the pictures is a Ruger 10/22 in a High Tower Armory 10/22 P-90 stock kit. It should fit on an actual FN P90/PS90.
(This rimifire 90/22 isn't considered an AW in CA so not required, just for demonstration purposes. Not legal advice, do your own research.)
The trigger blocks don't seem to stay on properly, so I'd add some Tesa tape or something to stabilize it a bit. Feel free to improve upon it.
Print the left and right side of the thumb-hole stock blocks, and two copies of the trigger blocks.
I'm using M-LOK screws
LBRY Tags: 3d2a; p90; ps90; 3d
(This rimifire 90/22 isn't considered an AW in CA so not required, just for demonstration purposes. Not legal advice, do your own research.)
The trigger blocks don't seem to stay on properly, so I'd add some Tesa tape or something to stabilize it a bit. Feel free to improve upon it.
Print the left and right side of the thumb-hole stock blocks, and two copies of the trigger blocks.
I'm using M-LOK screws
LBRY Tags: 3d2a; p90; ps90; 3d
Related to This Release
221
9
3dp90 pourguard 0.1 tolerance
Improved pour guard for the 3dp90. This pourguard will actually stick into the bolt housing. You can then use a bent coathanger placed in the outsi…
161
9
PS90 Beautification Project
Just some small PS90 upgrades
178
3
P90 Oil Bottle Assembly
A rough recreation of the hard to find Orea 700 Oil Bottle for the P90/PS90. This fits inside of the cylindrical slot in the stock of your P90/PS90. …
508
15
DIY90 Hammer Group Files
These are the files for the Hammer Group of the DIY90. Arguably the most important pert of the P90 as this contains one of only 2 differences from a …
292
9
Extended AWCY Burnt Bacon
Extended AWCY Burnt Bacon to hide ugly 16" barrels, sized for the 3dP90, but will likely fit most things without a gas block. ***NOTE*** This is inte…
Twitter
Matrix
Source
