866
18
View this release
Alternative links
I saw some people asking for a non-stock option for the Hoffman Tactical Orca. So I have adapted the original V5.3 stock neck into two pistol buffer tubes. One is effectively just the stock with the extra rear surface area removed. The other is a thinner tube for those who don't like a chunky look. I'm not sure if these would not be considered a stock by the ATF, but the tube is required for function of the firearm and it purposely doesn't have very much surface area for shouldering so there's a better chance this isn't considered a stock than the original stock.
Print settings: Check out the Orca documentation for print settings. For the thin buffer tube I would recommend printing it at 99/100% infill.
LBRY Tags: 3d printing; 3d2a; fosscad; ar-15; orca
Print settings: Check out the Orca documentation for print settings. For the thin buffer tube I would recommend printing it at 99/100% infill.
LBRY Tags: 3d printing; 3d2a; fosscad; ar-15; orca
Related to This Release
132
9
Buffer Retainer Hold Down Tool
This is a free buffer retainer hold down tool for installing and removing AR-15 buffers and buffer springs that was released by KAK: https://kakindus…
674
14
1
FOSSCAD GitHub Repo 2-23-2023
This is a backup of the FOSSCAD repo found on GitHub that as of now hasn't been updated since 2019.
The repo can be found at https://github.com/maduc…
96
7
ARK1.0 Ejector DXFs for SCS
The ARK1.0 can utilize printed ejectors but metal ones will last much longer. To this end, I present DXFs in order to have the ejectors cut for you. …
347
10
1
SlabSlav AKM Mag Remix
SlabSlav AKM Mag: Remix of Laffs Dynamics SlabSlav Flora AKM Mag
The only change made to the SlabSlav Flora was the removal of the flora texture pa…
439
17
TDB AR-15 Buffer
AR buffer I recommend filling with lead or tungsten weights also cap requires a little bit of super glue.
LBRY Tags: cad; 3d printing; the donbot
Twitter
Matrix
Source
