105
5
View this release
Alternative links
Hello all!
Firstly. This IS NOT MY DESIGN. This design belongs to
@SumOne:5
I am uploading this because his version did not fit on my print bed but I made this version that has a dovetail so it can fit on the print bed and does not sacrifice the structural integrity of the print.
I have found printing this rails down is best since it causes the print to be much more stable, but you are welcome to print in the orientation that works best for you!
Will fit 256mm x 256mm x 256mm build plate
Please comment / provide feedback.
If you guys need any models altered, etc please don't hesitate to comment.
Remix of Mando Corser 5 PDW G17
@SumOne:5
DETAILS FOR THIS REMIX:
FMDA DD17.2 Mando Corser 5 PDW G17
-G17 Gen.3
-Full Frame Grip
-Dove tail near rear pic rail to be able to fit on print bed
Corser Features:
-Reduced Grip Material and Grip Angle
-0 Deg. Offset on rear picatinny.
-Unexposed rear portion of slide.
-Extended slide cavity for enlarged rear baseplates.
-Slide rear baseplate adjustment pinhole.
-Notched rear trigger housing wall.
-Takes Gen.5 Take-down spring.
-PLA+ Friendly. "Fine" quality or better is recommended.
-Recommend Filament: PET-CF, PAHT CF, PPA-CF, or PPS-CF
Mando Features:
-7mm Raise on optic rail
-Optic rail inside top-face cut to Amerigo Ring Sight
-Added Spare Mag-well
-Right and Left side 7-slot Picatinny added
-Rear Sling point cavity cut for Blue Force Gear U-Loop
-For front sling point, use either side picatinny rail or front bottom rail
-Front rail system cut to use with 45mm diameter suppressors(heavy suppressor use with a PLA+ frame may cause warping).
Settings:
-Print-Orientation-Ready (however change to what works best for you)
-Use tree supports (I use organic)
-8-10 wall loops
-99% Gyroid Infill
LBRY Tags: 3d print; 256mm plate; mando; corser; glock 17
Firstly. This IS NOT MY DESIGN. This design belongs to
@SumOne:5
I am uploading this because his version did not fit on my print bed but I made this version that has a dovetail so it can fit on the print bed and does not sacrifice the structural integrity of the print.
I have found printing this rails down is best since it causes the print to be much more stable, but you are welcome to print in the orientation that works best for you!
Will fit 256mm x 256mm x 256mm build plate
Please comment / provide feedback.
If you guys need any models altered, etc please don't hesitate to comment.
Remix of Mando Corser 5 PDW G17
@SumOne:5
DETAILS FOR THIS REMIX:
FMDA DD17.2 Mando Corser 5 PDW G17
-G17 Gen.3
-Full Frame Grip
-Dove tail near rear pic rail to be able to fit on print bed
Corser Features:
-Reduced Grip Material and Grip Angle
-0 Deg. Offset on rear picatinny.
-Unexposed rear portion of slide.
-Extended slide cavity for enlarged rear baseplates.
-Slide rear baseplate adjustment pinhole.
-Notched rear trigger housing wall.
-Takes Gen.5 Take-down spring.
-PLA+ Friendly. "Fine" quality or better is recommended.
-Recommend Filament: PET-CF, PAHT CF, PPA-CF, or PPS-CF
Mando Features:
-7mm Raise on optic rail
-Optic rail inside top-face cut to Amerigo Ring Sight
-Added Spare Mag-well
-Right and Left side 7-slot Picatinny added
-Rear Sling point cavity cut for Blue Force Gear U-Loop
-For front sling point, use either side picatinny rail or front bottom rail
-Front rail system cut to use with 45mm diameter suppressors(heavy suppressor use with a PLA+ frame may cause warping).
Settings:
-Print-Orientation-Ready (however change to what works best for you)
-Use tree supports (I use organic)
-8-10 wall loops
-99% Gyroid Infill
LBRY Tags: 3d print; 256mm plate; mando; corser; glock 17
Related to This Release
2977
9
FMDA DD17.2 - 3D Printed Glock 17 Gen3 Frame - Gilmore Girls Remix By PlastiKrew
This is a remix of the FMDA DD17.2 3D Printable Glock 17 Gen3 frame that can be found on the Gatalog.
My Mrs has watched me build & test fire a ton…
377
5
FMDA DD19.2 v19.3 Remix: Mando Corser 4 PDW G19-F (SPLIT TO FIT 256MM PLATE)
Hello all!
Firstly. This IS NOT MY DESIGN. This design belongs to @SumOne:5
I am uploading this because his version did not fit on my print bed bu…
6806
19
FMDA DD19.2 - 3D Printed Glock 19 Gen3 Frame - Halo Remix By PlastiKrew
This is a remix of the FMDA DD19.2 3D Printable Glock 19 Gen3 frame that can be found on the Gatalog. That awesome design pack came with a ton of coo…
195
7
FMDA DD17.2 V1.4 G5S Plug 2022-10-06-14-38-12
Use this plug to give your custom frame design a G17.2 locking block and magwell pattern.
714
12
Compact Long Slide, P80 rails compatible printable Glock 17 with 19 grip
No description provided for this release
LBRY Tags: p80; glock
Twitter
Matrix
Source
