162
10
View this release
Alternative links
Keymod Cable Guide by Qwerm
A set of small keymod cable guides. Designed for use with 3.5mm cables.
Print Orientation: Print with face side down.
Recommended Print Settings:
Layer Height: 0.2mm
Wall Line Count: 4
Infill Density: 30%+
Support: No
Fuzzy Skin: No
LBRY Tags: 3dpg; firearm; 3d printed; keymod; cable guide
A set of small keymod cable guides. Designed for use with 3.5mm cables.
Print Orientation: Print with face side down.
Recommended Print Settings:
Layer Height: 0.2mm
Wall Line Count: 4
Infill Density: 30%+
Support: No
Fuzzy Skin: No
LBRY Tags: 3dpg; firearm; 3d printed; keymod; cable guide
Related to This Release
163
10
1
TPU Ammo Sleeve
TPU Ammo Sleeve by Qwerm
A five round ammo sleeve printable in TPU. It is designed to hold .308 and 6.5mm Creedmoor up to 30-06 and 7mm Rem Mag.
Or…
245
14
1
Micro Picatinny Cable Guide
Micro Picatinny Cable Guide by Qwerm
A simple, low profile, clip-on picatinny cable guide. Designed for use with 3.5mm cables. Insert the cable into…
239
9
USPSA Target Stencil (TPU)
USPSA Target Stencil by Qwerm
A spray paint stencil to make full size USPSA targets from cardboard. Included is the stencil split into various diffe…
88
3
Angled Picatinny Mount
If you want to mount a pistol light and/or laser on a larger platform, you might come across the same issue I did; the larger distance between the ba…
206
4
AK drill guide
Read the read me. This drill guide is intended for use with 1/8" or 1/4" center punches to locate the FCG holes on a bent receiver blank. It is you…
Twitter
Matrix
Source
