239
9
View this release
Alternative links
USPSA Target Stencil by Qwerm
A spray paint stencil to make full size USPSA targets from cardboard. Included is the stencil split into various different sizes so it can be print on different sized printers. The stencil can be printed in TPU in various parts and then welded together with a soldering iron or some other method. Measurements were taken from the official USPSA Competition Rules (Appendix B1).
Settings Used:
Material: TPU 95A
Wall Line Count: 2
Infill: N/A (Bottom and top layers should take up entire span of print)
For welding the pieces together I used a soldering iron with a flat tip set to 250°C and slowly ran it down the seams in a tight loop de loop pattern in order to mix and distribute the melted material between the two halves. Welding was done on both sides of the stencil.
The strap used in the images can be found here: https://makerworld.com/en/models/925647-tpu-strap-for-your-skis
LBRY Tags: guncad; stencil; tpu; uspsa; target
A spray paint stencil to make full size USPSA targets from cardboard. Included is the stencil split into various different sizes so it can be print on different sized printers. The stencil can be printed in TPU in various parts and then welded together with a soldering iron or some other method. Measurements were taken from the official USPSA Competition Rules (Appendix B1).
Settings Used:
Material: TPU 95A
Wall Line Count: 2
Infill: N/A (Bottom and top layers should take up entire span of print)
For welding the pieces together I used a soldering iron with a flat tip set to 250°C and slowly ran it down the seams in a tight loop de loop pattern in order to mix and distribute the melted material between the two halves. Welding was done on both sides of the stencil.
The strap used in the images can be found here: https://makerworld.com/en/models/925647-tpu-strap-for-your-skis
LBRY Tags: guncad; stencil; tpu; uspsa; target
Related to This Release
436
15
ARC Mounted Helmet Light
### ARC Mounted Helmet Light by Qwerm
A set of parts for making a helmet light for ARC rails. It accepts 20mm "Star PCB" LED modules and can be buil…
245
14
1
Micro Picatinny Cable Guide
Micro Picatinny Cable Guide by Qwerm
A simple, low profile, clip-on picatinny cable guide. Designed for use with 3.5mm cables. Insert the cable into…
2562
59
Nods Or Nothing V1.2
Nods Or Nothing V1.2 by QwermMakes
Nods Or Nothing is a replacement housing for the Nerf Modulus Day/Night Scope, a cheap $25-$30 IR digital camera.…
1394
27
Curved Sten Mag Remix
This is a Remix of a Remix done by MPRTech,
DannyMeatballs is the original dev!!!!!
mprtech can be found here : https://twitter.com/Mprtech2
Dan…
557
27
1
Durbans Molle Stash Box
Designed to Specifically Hold a Phone(or what ever you want/can fit) via Molle to either the front
of a Plate Carrier, or a Backpack ect.
Recommen…
Twitter
Matrix
Source
