562
14
View this release
Alternative links
Simple, fixed Iron Sights.
Requires an M4x25 socket head bolt and M4 nut per sight. Fitment to rail will be tight.
Print as pictured in the folder. Recommend 5 minimum walls - this ensures that the picatinny rail interface is as solid as possible. Be sure all support material is clear of the bolt and nut holes. Thread your bolt partially into the nut to press it into the side of the sight as deep as possible.
Rear sight aperture height over bore is about an inch at its center. Perfect for PDW's and other platforms where the stock isn't as in line with the top of the receiver rail like an AR. Will likely be too low on an AR platform.
LBRY Tags: 3d2a; 3dprinting; 3dprinted; pdw
Requires an M4x25 socket head bolt and M4 nut per sight. Fitment to rail will be tight.
Print as pictured in the folder. Recommend 5 minimum walls - this ensures that the picatinny rail interface is as solid as possible. Be sure all support material is clear of the bolt and nut holes. Thread your bolt partially into the nut to press it into the side of the sight as deep as possible.
Rear sight aperture height over bore is about an inch at its center. Perfect for PDW's and other platforms where the stock isn't as in line with the top of the receiver rail like an AR. Will likely be too low on an AR platform.
LBRY Tags: 3d2a; 3dprinting; 3dprinted; pdw
Related to This Release
189
5
AR-7 Brass Catcher
This is the stl file for a brass deflector/catcher that slides onto the rail of the Henry AR-7 rifle. Attaching a small cloth bag would collect the b…
244
5
22 Long Rifle
Don't dry-fire a rimfire gun, use a snap-cap. If you don't have one, print one of these. Unless you print ABS, I doubt it will hold up for long, but …
32
5
Eotech Vudu Switchview Lever
The Eotech Vudu I purchased second hand didn't have the zoom control lever, so here we are.
Print as pictured, top of lever to the build surface and…
96
3
PNV-10T-Dovetail
This adapter allows you to mount your PNV-10T to modern dovetail interfaces.
LBRY Tags: helmet_mount; nightvision; nvg; pnv; pnv-10t
113
2
Simrad GN1 Dovetail
This adapter allows you to mount your Simrad GN-1 to modern dovetail interfaces.
with this it is possible to attach your Simrad GN-1 cheaply and pre…
Twitter
Matrix
Source
