189
5
This is the stl file for a brass deflector/catcher that slides onto the rail of the Henry AR-7 rifle. Attaching a small cloth bag would collect the brass, otherwise it will simply create a pile of empty cases at the users feet. It's important to pick up your brass and not litter, but it's a pain searching through brush and tall grass for them!
I've only be able to do limited reliability testing, so please let me know if adjustments need to be made to the design. I'm aware that there's not much space for the user to use the charging handle, ideas are welcome!
LBRY Tags: guns; ar7; brass; 3d printing; 3d
I've only be able to do limited reliability testing, so please let me know if adjustments need to be made to the design. I'm aware that there's not much space for the user to use the charging handle, ideas are welcome!
LBRY Tags: guns; ar7; brass; 3d printing; 3d
Related to This Release
620
18
Adjustable Trigger, Trigger Guard
Replaces the trigger guard on an AR. An adjustable screw helps removing the extra pre-travel and post-travel of the trigger. This makes a mil-spec tr…
669
4
The Modern Gunsmith - Volume 1
By James Virgil Howe
A Guide for the Amateur and Professional Gunsmith in the Design and Construction of Firearms, with Practical Suggestions for Al…
562
2
The Modern Gunsmith - Volume 2
By James Virgil Howe
A Guide for the Amateur and Professional Gunsmith in the Design and Construction of Firearms, with Practical Suggestions for Al…
299
2
Muzzle Break Nut
This goes with the Muzzle Break also posted on this channel. The slot is to allow it to slide without removing the sights on the barrel.
LBRY Tags: …
244
5
22 Long Rifle
Don't dry-fire a rimfire gun, use a snap-cap. If you don't have one, print one of these. Unless you print ABS, I doubt it will hold up for long, but …
Twitter
Matrix
Source
