372
8
1
I M SPEED Grip (3DP PCC): FFFTech/FFFTechnology
A design created from the ground up for 3D printed pistol caliber carbines. Similar in aesthetics to original Laffs Dynamics
Slipstream grips, but with a more vertical grip angle, and is slightly shorter in OAL.
Mounts to:
* MOD-9
* MOD-9 V2
* MOD-9 V3
* WTF-9
* FGC9
* FGC9 MKII
* Shuty AP9
* Shuty AP9 2020
* KC9
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; firearms; grip; pcc; 3dp
A design created from the ground up for 3D printed pistol caliber carbines. Similar in aesthetics to original Laffs Dynamics
Slipstream grips, but with a more vertical grip angle, and is slightly shorter in OAL.
Mounts to:
* MOD-9
* MOD-9 V2
* MOD-9 V3
* WTF-9
* FGC9
* FGC9 MKII
* Shuty AP9
* Shuty AP9 2020
* KC9
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
LBRY Tags: 3d printing; firearms; grip; pcc; 3dp
Related to This Release
937
17
IA2 Grip (AR-15) V1.1.0
IA2 Grip (AR-15) V1.1.0: Laffs Dynamics
(Improved A2 Grip) Created roughly with the resemblance of the "never in short supply" A2 grip. Removes the…
687
4
Razor Blade Pistol Braces, Full Length
Razor Blade Pistol Braces, Full Length: Laffs
Angled blade style pistol braces for weapon platforms that use AR-15 carbine buffer extensions. Uses 1…
297
12
47-11 AKM Grips
47-11 AKM Grips: FFFTech/FFFTechnology
Grips for AK pattern / AKM rifles; with similar overall geometry of Browning 1911 pistol's grip.
Two varian…
213
4
PM-DTA Grips (AR-15)
PM-DTA Grips (AR-15): FFFTech/FFFTechnology
This grip got a BIG BUTT, a thiCC Thumper, a HUUUUUUUUGE ASS! Good GAWD!
This is the Pixar Mom Dump Tru…
307
13
Rigid M16 Style Brace
This rigid brace is based on a design for an M16 style brace I designed years ago and did not make. It was intended to be moulded or printed in flexi…
Twitter
Matrix
Source
